Bedienungsanleitung Indesit I 64I 6C6A (Seite 13 von 20) (Englisch)

577361

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Planning cooking with the electronic

programmer*

Setting the clock

After the appliance has been connected to the

power supply, or after a blackout, the display will

automatically reset to 0:00 and begin to blink. To set

the time:

1. Press the COOKING TIME button

and the

COOKING END TIME

simultaneously.

2. Within 4 seconds of having pressed these

buttons, set the exact time by pressing the + and -

buttons. The + button advances the hours and the

button decreases the hours.

Once the time has been set, the programmer

automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the

time has elapsed a buzzer sounds.

To set the timer proceed as follows:

1. press the TIMER button . The display shows:

2. Press the + and - buttons to set the desired time.

3. When the buttons are released the timer begins

counting down and the current time appears on the

display.

4. After the time has elapsed a buzzer will sound,

and this can be switched off by pressing any button

(except the + and - buttons). The symbol

will

switch off.

The timer does not switch the oven on or off.

Adjusting the volume of the buzzer

After selecting and confirming the clock settings,

use the - button to adjust the volume of the alarm

buzzer.

Setting the cooking time with a delayed start

First decide which cooking mode you wish to use

and set a suitable temperature using the SELECTOR

and THERMOSTAT knobs on the oven.

At this point it is possible to set the cooking time:

1. Press the COOKING TIME button

2. Within 4 seconds of having pressed this button,

set the desired amount of time by pressing the + and

- buttons. If, for example, you wish to set a cooking

time of 30 minutes, the display will show:

3. 4 seconds after the buttons are released, the

current time (for example 10.00) reappears on the

display with the symbol

and the letter A (AUTO).

Next the desired cooking end time must be set:

4. Press the END COOKING TIME button

5. Within 4 seconds of having pressed this button,

adjust the cooking end time by pressing the + and -

buttons. If, for example, you want cooking to end at

13.00, the display shows:

6. 4 seconds after the buttons are released, the

current time (for example 10.00) reappears on the

display with the letter A (AUTO).

At this point, the oven is programmed to switch on

automatically at 12:30 and switch off after 30

minutes, at 13.00.

Setting the cooking time with an immediate start.

Follow the above procedure for setting the cooking

time (points 1-3).

! When the letter A appears, this indicates that both

the cooking time and the end cooking time have

been programmed in AUTO mode. To restore the

oven to manual operation, after each AUTO cooking

mode press the COOKING TIME

and END

COOKING TIME

buttons simultaneously.

! The symbol

will remain lit, along with the oven,

for the entire duration of the cooking programme.

The set cooking duration can be displayed at any

time by pressing the COOKING TIME button

and the cooking end time may be displayed by

pressing the END COOKING TIME button

When the cooking time has elapsed a buzzer

sounds. To stop it, press any button apart from the

+ and - buttons.

Cancelling a previously set cooking programme

Press the COOKING TIME button and the

COOKING END TIME simultaneously.

Correcting or cancelling previously set data

The data entered can be changed at any time by

pressing the corresponding button (TIMER,

COOKING TIME or COOKING END TIME) and the +

or - button.

When the cooking time data is cancelled, the

cooking end time data is also cancelled

automatically, and vice versa.

If the oven has already been programmed, it will not

accept cooking end times which are before the start

of the programmed cooking process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit I 64I 6C6A Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit I 64I 6C6A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info