Bedienungsanleitung Indesit ISLK 66 LS W (Seite 9 von 56) (Alle Sprachen)

685095

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

GENERAL SAFETY

• Before any cleaning or maintenance operation,

disconnect hood from the mains by removing the plug

or disconnecting the mains electrical supply.

• Always wear work gloves for all installation and

maintenance operations.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Children shall not be allowed to tamper with the

controls or play with the appliance.

• Cleaning and user maintenance shall not be made

by children without supervision.

• The premises where the appliance is installed must

be sufficiently ventilated, when the kitchen hood is

used together with other gas combustion devices or

other fuels.

• The hood must be regularly cleaned on both the

inside and outside (AT LEAST ONCE A MONTH).

• This must be completed in accordance with the

maintenance instructions provided. Failure to follow

the instructions provided regarding the cleaning of the

hood and filters will lead to the risk of fires.

• Do not flambé under the range hood.

• For lamp replacement use only lamp type indicated

in the Maintenance/Replacing lamps section of this

manual.

The use of exposed flames is detrimental to the filters

and may cause a fire risk, and must therefore be

avoided in all circumstances.

Any frying must be done with care in order to make

sure that the oil does not overheat and ignite.

CAUTION: Accessible parts of the hood may become

hot when used with cooking appliances.

• Do not connect the appliance to the mains until the

installation is fully complete.

• With regards to the technical and safety measures to be adopted for fume

discharging it is important to closely follow the regulations provided by the local

authorities.

• The air must not be discharged into a flue that is used for exhausting fumes

from appliance burning gas or other fuels.

• Do not use or leave the hood without the lamp correctly mounted due to the

possible risk of electric shocks.

• Never use the hood without effectively mounted grids.

• The hood must NEVER be used as a support surface unless specifically

indicated.

• Use only the fixing screws supplied with the product for installation or, if not

supplied, purchase the correct screws type.

• Use the correct length for the screws which are identified in the Installation

Guide.

• In case of doubt, consult an authorized service assistance center or similar

qualified person.

WARNING!

• Failure to install the screws or fixing device in accordance with these

instructions may result in electrical hazards.

• Do not use with a programmer, timer, separate remote control system or

any other device that switches on automatically.

The hood can look different to that illustrated in the drawings in this

booklet. The instructions for use, maintenance and installation, however,

remain the same.

Closely follow the instructions set out in this manual. All responsibility, for

any eventual inconveniences, damages or fires caused by not complying with the

instructions in this manual, is declined. This appliance is intended to be used in

household and similar application such as: - staff kitchen areas in shop, offices

and other working environments; - farm houses; - by clients in hotels, motels and

other residential type environments; - bed and breakfast type environments.

• It is important to conserve this booklet for consultation at any moment. In

the case of sale, cession or move, make sure it is together with the product.

• Read the instructions carefully: there is important information about

installation, use and safety.

• Do not carry out electrical or mechanical variations on the product or on the

discharge conduits.

• Before proceeding with the installation of the appliance verify that there are

no damaged all components. Otherwise contact your dealer and do not

proceed with the installation.

The minimum distance between the supporting surface for the cooking

equipment on the hob and the lowest part of the range hood must be not less

than 60cm from electric cookers and 75cm from gas or mixed cookers.

If the instructions for installation for the gas hob specify a greater distance, this

must be adhered to.

Expansion wall plugs are provided to secure the hood to most types of

walls/ceilings. However, a qualified technician must verify suitability of the

materials in accordance with the type of wall/ceiling. The wall/ceiling must be

strong enough to take the weight of the hood.

Do not tile, grout or silicone this appliance to the wall. Surface mounting

only.

ELECTRICAL CONNECTION

The mains power supply must correspond to the rating indicated on the plate

situated inside the hood. If provided with a plug connect the hood to a socket in

compliance with current regulations and positioned in an accessible area, after

installation. If it not fitted with a plug (direct mains connection) or if the plug is not

located in an accessible area, after installation, apply a double pole switch in

accordance with standards which assures the complete disconnection of the

mains under conditions relating to over-current category III, in accordance with

installation instructions.

WARNING!

Before re-connecting the hood circuit to the mains supply and checking the

efficient function, always check that the mains cable is correctly assembled.

Replacing the power cable

Warning! If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in order to avoid

hazard.

AIR VENT

(for the suction versions)

Connect the hood and discharge holes on the walls with a diameter equivalent to

the air outlet (connection flange).

Using the tubes and discharge holes on walls with smaller dimensions will cause

a diminution of the suction performance and a drastic increase in noise.

Any responsibility in the matter is therefore declined.

! Use a duct of the minimum indispensable length.

! Use a duct with as few elbows as possible (maximum elbow angle: 90°).

! Avoid drastic changes in the duct cross-section.

For this product, the rear output use is PROHIBITED for the countries

within the European Community, the EFTA countries, Turkey and all the

countries subject to the Directives EU 65/2014 and EU 66/2014.

! The company declines any responsibility whenever these regulations are

not respected.

Indesit ISLK 66 LS W Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info