Bedienungsanleitung Indesit IVIA 633 (Seite 6 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

577692

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

To switch the hob on, press and hold the button for

approximately one second.

The cooktop is switched On when a beep sound is

emmited and all the cooking zones displays show

the digit point.

When the cooktop is OFF, after 5 sec the control .

switches off the KEYLOCK LED to reduce the power

consumption.

As soon as we touch a key, the KEYLOCK LED goes

ON and we can continue to use the cooktop, unlocking

the keyboard.

Switching off the cooktop is signalled by 3 beep sound

Setting the Power Management

The cooktop maximum power limit is 7200W. This power

limit can be reduced by the user to 2800W, 3500W or

6000W.

The sequence to set a new Cooktop Power Limit is:

·During the first 30 seconds after plugging the applian-

·The Touch has to be unlocked and all Heaters Off

·Press at the same time Heater 1 and Heater 3 selection

keys

·Once this is done, a beep sounds and the actual Co-

oktop Power Limit will be shown in the heater displays.

For selecting a new Power Limit:

·With the (+) and (-) keys, the Power Limit is increased.

The selectable powers are: 2800W, 3500W, 6000W or

7200W. When the power is 7200W, if the [+] or [-] key is

touched the power changes to 2800W.

The sequence to finish recording the new Cooktop Po-

wer Limit is:

·Press at the same time Heater 1 and Heater 3 selection

keys

·Once this is done, new Cooktop Power Limit is recor-

ded and there is a system reset.

To finish without recording changes:

·If during 60 seconds there is no action, changes are not

recorded and there is a system reset.

• Loud whistle: heard when two induction elements of

the same group function simultaneously at maximum

power and/or when the booster function is set on

the larger element while the other is auto-adjusted.

Noise is reduced by decreasing the power level of the

auto-adjusted induction element; pot bottom layers

made of different kinds of materials are among the

main causes of this noise.

• Fan noise: a fan is necessary to ensure the hob functions

correctly and to safeguard the electronic unit from

possible overheating. The fan functions at maximum

power when the large induction element is at maximum

power or when the booster function is on; in all other

cases, it works at average power depending on the

temperature detected. Furthermore, the fan may continue

to work even after switching the hob off, if the temperature

detected is high.

The types of noise listed above are due to induction

technology and are not necessarily operational faults.

! If the (-) or (+)button is pressed for an extended period

of time, the display scrolls quickly though the power

levels and timer minutes.

Initial Light Conditions

When power is initially applied to the Cooktop, the to-

uch control conducts a calibration process for the to-

uch keys, which requires a low level of ambient light in

the area of the touch keys.

If during this calibration process excessive ambient

lighting is detected the User Interface displays „FL”

(Infrared Ambient Light Error) and the control cali-

bration process is suspended. In order to rectify the

process any lighting that could effect the calibration

process should be switched off (e.g. halogen cooker

hood lighting). The error will disappear when satisfac-

tory ambient lighting is detected and the touch control

calibration procedure will now complete satisfactorily.

-The „FL” error can only be generated within approx 3s

of initial power being applied to the cooktop.

-We recommend that the user switches off all cooker

hood lighting and lighting directed towards the cook-

top when power is initially applied to the cooktop.

-After the touch control has conducted its initial cali-

bration process, (approx 3s) any cooker hood or other

lighting can be switched on as normal and will not af-

fect the operation of the touch control.

Switching on the hob

After connecting the hob to the electricity mains, the

touch pannel might be automatically locked. To un-

clock the pannel press and hold the Control Panel

Loock button .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit IVIA 633 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info