Bedienungsanleitung Indesit IVIA 633 (Seite 11 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

577692

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning barbecues

and ovens), stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these may

scratch the surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufficient simply to wash the hob using a

damp sponge and dry it with absorbent kitchen towel.

• If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well and

dry thoroughly

• To remove more stubborn dirt, use a suitable scraper.

Remove spills as soon as possible, without waiting for

the appliance to cool, to avoid residues forming crusty

deposits. You can achieve excellent results by using

a rust-proof steel wire sponge - specifically designed

for glass ceramic surfaces - soaked in soapy water.

• If any plastic or sugary substances are accidentally

melted on the hob, remove them immediately with the

scraper, while the surface is still hot.

• Once it is clean, the hob may be treated with a special

protective maintenance product: the invisible film left

by this product protects the surface from drips during

cooking. This maintenance task should be carried out

while the appliance is warm (not hot) or cold.

• Always remember to rinse the appliance well with clean

water and dry it thoroughly: residues can become

encrusted during subsequent cooking processes.

Stainless steel frame (only in models with outer frame)

Stainless steel can be marked by hard water which has

been left on the surface for a long time, or by cleaning

products containing phosphorus.

After cleaning, it is advisable to rinse the surface well

and dry it thoroughly. If water is spilt on the surface, dry

it quickly and thoroughly.

! Some hobs have an aluminium frame which is similar to

stainless steel. Do not use any cleaning or degreasing

products which are not suitable for use with aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on

each side.

2. Loosen the screws holding the fixing hooks in each

corner.

3. Take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself. If the

appliance breaks down, contact a Service Centre.

Technical description of the

models

The induction system is the quickest existing way of cooking. Unlike traditional hotplates where the cooking zone heats

up, with the induction system heat is generated directly inside pans which have ferromagnetic bases.

Key:

I = single induction cooking zone

B = booster: the power level of the cooking zone may be boosted

Hobs

Cooking zone

Back Left

Back Right

Front Left

Front Right

Total power

Power (W)

I 1200 - B1600

I 1500 - B 2000

I 1200 - B1600

7200

Power (W)

I 1200 - B1600

I 1500 - B 2300

6200

VIB 644 C E

VIB 744 C E

VIB 633 C E

IVIA 633 C E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit IVIA 633 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info