Bedienungsanleitung Indesit P31IB (Seite 14 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch)

512992

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

HOOD

420

Min.

min.

650

mm. with hood

min.

700

mm. without hood

mm.

600

Min. mm.

420

Min. mm.

Fig. C

d) Should the cooktop be installed directly under a

cupboard, the latter should be at least 700 mm

(millimetres) from the top, as shown in Fig. C.

e) The dimensions of the cutout for the appliance must

be those indicated in the figure D. Clamps are provided

to fasten the cooktop to counters measuring from 20

to 40 mm in thickness. To fasten the cooktop securely,

it is recommended that all the clamps be used.

555 mm

55 mm

475 mm

Fig. D

Fastening Clamps - Assembly Diagram

Clamp Position for Clamp Position for

H=20mm top H=30mm top

Front

Clamp Position for

H=40mm top Back

N.B: Use the clamps contained in the "accessory kit."

f) In the event the cooktop is not installed above a built-

in oven, a wood panel must be inserted as insulation.

This panel must be placed at least 20 mm from the

bottom of the cooktop itself.

Important: When installing the cooktop above a built-in

oven, the oven should be placed on two wooden strips; in

the case of a joining cabinet surface, remember to leave

a space of at least 45 x 560 mm at the back.

560 mm.

45 mm.

When installing the cooktop above a built-in oven without

forced ventilation, ensure that there are air inlets and

outlets for ventilating the interior of the cabinet adequately.

The hob P 640 AST can only be installed above built-

in ovens provided with cooling ventilation.

Gas Connection for Cooktop

The cooktop should be connected to the gas supply by an

authorized installer. During installation of this product it is

essential to fit an approved gas tap to isolate the supply

from the appliance for the convenience of any subsequent

removal or servicing. Connection of the appliance to the

gas mains or liquid gas tanks must be carried out

according to the safety standards currently in force, and

only after it is ascertained that it is suitable for the type of

gas to be used. If not, follow the instructions indicated in

the section entitled, “Adapting the Cooktop for Different

Types of Gas”. If the cooktop is to be connected to tanks

containing liquid gas, use pressure regulators that comply

with current safety standards.

Important: To insure that the appliance operates safety,

the gas is regulated correctly and your appliance lasts

over time, make sure that gas pressure levels comply with

the indications given in Table 1, “Nozzle and Burner

Specifications”.

Gas Connection to Non-flexible Pipe

(copper or steel)

Connection to the gas source must be done in such a way

as to not create any stress points at any part of the

appliance.

The appliance is fitted with an adjustable, "L" shaped

connector and a gasket for the attachment to the gas

supply. Should this connector have to be turned, the gasket

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit P31IB Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info