Bedienungsanleitung Indesit pwde 8148 (Seite 8 von 16) (Englisch)

311726

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

How to run a wash cycle or a

drying cycle

1. SWITCH THE MACHINE ON. Press the

button; the START/PAUSE indicator light will flash

slowly in a blue colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes and wash cycles on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

Detergents and laundry.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Use the WASH

CYCLE SELECTOR knob to select the desired wash

cycle. A temperature and spin speed is set for each

wash cycle; these values may be adjusted. The

duration of the cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons:

Modify the temperature and/or spin

speed. The machine automatically displays the

maximum temperature and spin speed values set for

the selected cycle, or the most recently-used settings

if they are compatible with the selected cycle. The

temperature can be decreased by pressing the

button, until the cold wash OFF setting is reached.

The spin speed may be progressively reduced by

pressing the

button, until it is completely excluded

(the OFF setting). If these buttons are pressed

again, the maximum values are restored.

Setting the drying cycle

The first time the button

is pressed, the machine

will automatically select the maximum drying cycle

which is compatible with the selected wash cycle.

Subsequent presses will decrease the drying level and

then the drying time, until the cycle is excluded

completely ("OFF"). If these buttons are pressed

again, the maximum values are restored.

Drying may be set as follows:

A- Based on the desired laundry dryness level:

Iron: suitable for clothes which will need ironing

afterwards. the remaining dampness softens

creases, making them easier to remove. "A1"

appears on the display.

Hanger: ideal for clothes which do not need to be

dried fully. "A2" appears on the display.

Cupboard: suitable for laundry which can be put

back in a cupboard without being ironed. "A3"

appears on the display.

Extra: suitable for garments which need to be dried

completely, such as sponges and bathrobes. "A4"

appears on the display.

B - Based on a set time period: between 30 and 180

minutes (Max. load 4 kg).

If your laundry load to be washed and dried is

much greater than the maximum stated load (see

adjacent table of programmes), perform the wash

cycle, and when the cycle is complete, divide the

garments into groups and put some of them back

in the drum. At this point, follow the instructions

provided for a "Drying only" cycle. Repeat this

procedure for the remainder of the load.

A cooling-down period is always added to the end

of each drying cycle.

Drying only

Use the cycle selector knob to select a drying cycle

(11-12-13) in accordance with the type of fabric.

The desired drying level or time may also be set

using the DRYING button

Modify the cycle settings.

 Press the button to enable the option; the indicator

light corresponding to the button will switch on.

 Press the button again to disable the option; the

indicator light will switch off.

 If the selected option is not compatible with the

set wash cycle, the indicator light will flash and the

option will not be activated.

 If the selected option is not compatible with a

previously selected one, the indicator light

corresponding to the first function selected will flash

and only the second option will be activated; the

indicator light for the option which has been

activated will be illuminated.

Note: if the SMART option has been selected,

none of the incompatible options may be activated.

 The options may affect the recommended load

value and/or the duration of the cycle.

7. START THE WASH CYCLE. Press the START/

PAUSE button. The corresponding indicator light will

turn blue, remaining lit in a fixed manner, and the

door will be locked (the DOOR LOCKED

symbol

will be lit). To change a wash cycle while it is in

progress, pause the washer-dryer using the

START/PAUSE button (the START/PAUSE indicator

light will flash slowly in an amber colour); then

select the desired cycle and press the START/

PAUSE button again. To open the door while a

cycle is in progress, press the START/PAUSE

button; if the DOOR LOCKED

symbol is switched

off the door may be opened. Press the START/

PAUSE button again to restart the wash cycle from

the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text END on the display; when

the DOOR LOCKED

symbol switches off the door

may be opened. Open the door, unload the laundry

and switch off the machine.

 If you wish to cancel a cycle which has already

begun, press and hold the

button. The cycle will be

stopped and the machine will switch off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit pwde 8148 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info