Bedienungsanleitung Indesit taa 3 (Seite 10 von 36) (Deutsch, Englisch, Holländisch)

338049

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ATTENTION

Read your manual carefully since it contains instructions

which will ensure safe installation, use and maintenance

of your appliance.

Your Refrigerator is built to International safety standards

(EN60) ans has been awarded the European approval mark

(IMQ) for compliance with UK electrical safety requirements.

It also meets the EC standards on the prevention and elimi-

nation of readio interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under

no circumstances should it be installed outside even if pro-

tected by a roof. Leaving the appliance exposed to the rain

and whether is exceedingly dangerous.

2. The appliance should be used only by adults and exclu-

sively for storing foodstuffs in compliance with the instruc-

tions provided in this manual. Under no circumstances should

children be allowed to operate, or tamper with, this product.

3. Do not attempt to operate or handle this appliance when

barefoot, or with wet hands or feet.

4. It is highly recommended that you do not operate

this appliance by connecting it to the power supply with

extensions or multiple socket plugs. If the refrigerator

has been installed between two cabinets, make sure that

the supply chord is not dangerously crimped or trapped

beneath a heavy object.

5. Never pull the cable or the appliance to remove the plug

from the socket; this is exceedingly dangerous.

6. Do not touch the internal cooling elements, especially if

your hands are wet, since you could burn or hurt yourself.

7. Before doing any cleaning, disconnect the appliance from

the electricity (by pulling out the plug or turning off the gen-

eral switch in your home); it is not sufficient to place the

temperature regulation knob on

to cut off the power.

8. Before disposing of your old appliance, remember to break

or remove the lock as a safety measure to protect children

who might lock themselves inside the appliance when play-

ing. In addition, if the appliance is a new one with a lock,

keeo the key out of the reach of small children.

9. If your appliance is not operating properly, read the chap-

ter entitled, “Trouble Shooting”, which might help you re-

solve the problem, before calling an after-sales service cen-

tre. Do not attempt to repair the appliance by tampering

with the internal components.

10. If the power supply cord must be replaced, please

contact one of our Customer Service Centers. In some

cases, the connections are made using special terminals

and in others a special tool must be used to access the

connections.

11. Do not use electric appliances inside the compartment

for food storage, if these are not those recommended

by the manufacturer.

12. At the end of the functional life of your appliance –

containing cyclopentane gas in the insulation foam and

perhaps gas R600a (isobutane) in the refrigeration circuit –

the latter should made safe before being sent to the dump.

For this operation, please contact your dealer or the Local

Organisation in charge of waste disposal.

Installation

Proper installation of the appliance is essential to en-

sure the best and most efficient performance of your

appliance.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provide the

appropriate amount of air re-circulation. It is also important

that the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

For proper ventilation of the appliance, you must leave:

- a space of at least 10 cm between the top part and any

cabinets above it;

- a space of at least 5 cm between the sides of the appliance

and any adjacent cabinets/walls.

Away from Heat

Avoid positioning the appliance in a place where it is

directly exposed to sunlight or near an oven, cook top

or the like.

Levelling

The floor should be perfectly level; if not, you can adjust the

feet at the front of the appliance.

Earthing

Before making the electrical connection, check that the volt-

age shown on the data plate, that you will find on the bot-

tom left hand side of the appliance next to the crisper, corre-

sponds to that of your home and that the socket is earthed in

compliance with all current electrical regulations. If the sys-

tem is not earthed, the manufacturer declines all liability for

consequent damages or losses. Do not use adapters or mul-

tiple sockets. Position the appliance in such a way that

you can access the socket where it is plugged in.

Check the power load

The electrical socket must support the maximum power load

of the appliance shown on the data plate (on the bottom left

hand side of the appliance next to the crisper).

Before plugging the appliance to the mains

Stand the appliance upright and wait at least 3 hours before

plugging the appliance into the mains to ensure proper per-

formance.

Safety - a good habit to get into.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit taa 3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info