Bedienungsanleitung Indesit UIAA 12F (Seite 14 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

489362

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical socket

ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located inside the freezer

(e.g. 150 W).

• The voltage is in the range of values indicated on the data plate

located inside the freezer (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it (

see Assistance

). Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these safety

measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (

see Installation

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes after

being switched on. The compressor also starts each time the

power supply is cut off whether voluntarily or involuntarily

(blackout).

1. Insert the plug into the socket and make sure that the green

POWER indicator light illuminates (the TEMPERATURE

ADJUSTMENT knob must be in the

position).

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value and press the SUPER FREEZE button (rapid freezing):

the SUPER FREEZE indicator light

will illuminate. It will switch

off once the freezer has reached its optimal temperature. At this

point food may be placed inside the appliance.

Using the freezer to its full potential

• Use the TEMPERATURE CONTROL knob to adjust the

temperature.

= warmest

= coldest

ECO

is the optimal temperature for energy saving levels.

We recommend, however, a medium position.

• Do not re-freeze food that is defrosting or that has already

been defrosted. These foods must be cooked and eaten

(within 24 hours).

• Fresh food that needs to be frozen must not come into contact

with food that has already been defrosted. Fresh food must be

stored in the top FREEZER and STORAGE compartment.

• Do not place glass bottles which contain liquids, and which are

corked or hermetically sealed in the freezer because they

could break.

• The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties located

within the freezer (for example: Kg/24h: 4).

• To freeze (if the freezer is already operating):

- for small quantities which are less than those indicated on the

data plate, press the rapid freezing SUPER FREEZE button

(corresponding indicator light

illuminates), insert the food

and close the door. The function is disabled automatically after

24 hours or when optimal temperatures have been reached

(indicator light goes out);

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the freezer

door. This will help maintain the temperature inside the freezer,

ensuring that foods are conserved for at least 9 -14 hours.

In order to obtain a greater amount of space in the freezer

compartment, you may remove the bins (except the lowest bin

and the special COOL CARE ZONE bin, which has an

adjustabletemperature) and place the food directly onto the

racks/glass shelves supplied [where present].

Indesit UIAA 12F Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit UIAA 12F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info