Bedienungsanleitung Indesit VIC 641 B (Seite 9 von 80) (Holländisch)

77791

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Start-up and use

! The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

! A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.

Types of noise during normal hob operation:

• Buzz: due to the vibration of the metallic parts that

make up the induction element and the pot; it is

generated by the electromagnetic field required for

heating and increases as the power of the induction

element increases.

• Soft whistle: heard when the pot placed on the

heating zone is empty; the noise disappears once

food or water is placed into the pot.

• Crackle: produced by the vibration of materials on

the bottom of the pot due to the flow of parasitic

currents caused by electromagnetic fields

(induction); can be more or less intense depending

on the material making up the bottom of the pot, and

decreases as the pot dimensions increase.

• Loud whistle: heard when two induction elements of

the same group function simultaneously at maximum

power and/or when the booster function is set on

the larger element while the other is auto-adjusted.

Noise is reduced by decreasing the power level of

the auto-adjusted induction element; pot bottom

layers made of different kinds of materials are

among the main causes of this noise.

• Fan noise: a fan is necessary to ensure the hob

functions correctly and to safeguard the electronic

unit from possible overheating. The fan functions

at maximum power when the large induction

element is at maximum power or when the booster

function is on; in all other cases, it works at average

power depending on the temperature detected.

Furthermore, the fan may continue to work even after

switching the hob off, if the temperature detected is

high.

The types of noise listed above are due to induction

technology and are not necessarily operational faults.

! If the - or + button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the button

for approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector button

and a power adjustment device consisting of a

double

- and + button.

• To begin operating a cooking zone, press the

corresponding control button and set the desired power

level (between 0 and 9) using the buttons

- and +.

Booster function*

The booster function for some of the cooking zones

may be used to shorten heating-up times. It may be

activated by pressing the

button. The indicator

light directly above the button will illuminate. This

function boosts the power to 3000 W or 4000 W,

depending on the size of the relevant cooking zone.

The booster stops automatically after 4 minutes. While

the booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate

at a reduced power level (e.g. if the booster for the

rear left-hand hotplate has been activated, the power

level of the front left-hand hotplate will be reduced).

For further information, please refer to the Technical

description of the models.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button

and:

• Press the

- button: the power of the cooking zone

will progressively decrease until it is switched off.

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3. Press the

programming button.

The indicator light corresponding to the selected zone

will start flashing.

4. Set the cooking duration using the

- and +

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

* Only available in certain models.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit VIC 641 B Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit VIC 641 B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info