Bedienungsanleitung Indesit w 128 x (Seite 20 von 44) (Deutsch, Englisch, Spanisch)

311730

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

Easy iron

This function allows your

washing to come out of the

machine without creases,

making it much easier to iron.

You can use it with programmes

3-4 (Cotton), 5-6 (Synthetics)

and 8-9 (Delicates).

Press this button in

programmes 5-6-8-9 and the

wash cycle will come to a stop

on symbol

. You can comple-

te it by pressing button E again.

Important: this function should

not be used when button H (Stain

removal) has been pressed.

Extra Rinse

This helps to increase the

amount of rinse cycles in

programmes for sturdy fabrics.

We recommend that you use it

to improve the machine's

rinsing power when dealing with

a full load and a great amount of

detergent.

Rapid wash

This button reduces the length

of the wash programme by

about 30%. It cannot be used

with special programmes (see

page 18) or those for wool and

silk.

Stain removal (see page 21)

Thanks to this command, the

washing machine will carry out

a more intensive wash that

Here I’m in command

Understanding the control panel

Making the right choice is important. And it’s easy.

Programme selector knob

and programmed start

Use this knob to select the wash

programme.

Turn this knob clockwise only.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the knob.

Now press on/off button I (position

I), pilot lamp L will start flashing.

After 5", the setting will be

accepted, pilot lamp L will stop

flashing (staying lit) and the wash

cycle will begin.

Should you wish to interrupt the

programme in progress or set a

new one, select one of the

symbols

(Stop/Reset) and wait

5" : when the cancellation has

been accepted, pilot lamp L

flashes, and you can then turn the

appliance off.

You can use this knob to delay

the appliance's operation.

Select one of the four delay time

positions, press the on/off button

I (position I) and wait 5". The

setting has now been accepted

(pilot lamp L stays lit) and you can

select the programme you desire.

Pilot lamp L has a particular

flashing motion (2" on and 4" off)

to indicate that a delayed start

has been set.

During this phase, you can open

the appliance door and change

the washing load, should you

wish to do so.

After the wash cycle has been set

and accepted by the washing

machine, turning the knob will

have no effect (except for when

it is on position

Stop/Reset).

Temperature control knob

It is used to set the wash tempe-

rature in the recommended

programme table on pag. 18. It

also allows you to reduce the tem-

perature recommended for the

selected programme, and even to

set a cold wash cycle (

Spin exclusion knob

It is used to exclude the spin

cycle (by choosing symbol

)

or to reduce the spin speed of

the selected programme. The

maximum speed for the four

types of fabric are:

.=>HE? 5FAA@

Cotton 1200 rpm

Synthetics 800 rpm

Wool 600 rpm

Silk no

Note: distribution phase will be

carried out at low speed.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle

wash;

3. Fabric conditioner.

The detergent dispenser with the

additional bleach compartment

is here.

Instructions for installation and use

optimises the effectiveness of the

liquid additives, thus allowing

more resistant stains to be

removed. When you press the

stain removal button, you cannot

activate the pre-wash.

On-off

When button I is pressed, the

washing machine is switched

on, when it is not the machine

is switched off.

Turning the appliance off

does not cancel the selected

programme.

The on-off lamp

Lamp L flashes when the

appliance is switched on and

awaiting a programme to be set.

A steady light means the

appliance has accepted the

selected programme.

The door block lamp

The safety lamp indicates that the

washing machine door is locked

to prevent it from being opened

accidentally. To avoid any

damages to lock mechanism,

you must wait for the lamp to

extinguish, before attempting to

open the door which takes around

three minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit w 128 x Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info