Bedienungsanleitung Indesit WD10 (Seite 14 von 20) (Englisch)

46133

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Treat your machine well and it will provide

many years of trouble free service

Easy Care and Maintenance

Your washer-dryer is a reliable companion in life and on the job. It is just as important for you to keep it in

shape.

Your washer-dryer is designed

to provide reliable service over

many years. A few simple steps

will help to prolong its life and

avoid problems. It is advisable,

to turn off water taps when the

machine is not to be used, this

protects the hoses, etc.

If the water in your area is too

hard, use a deliming product

(water is hard if it often leaves

whitish stains around taps or

drains, especially of bath tubs.

For more accurate information as

to the type of water in your

system, call the local water

works or a local plumber).

Pockets must always be

emptied removing even pins,

badges and any other hard

object.

The washer-dryer exterior

should be cleaned with a rag

dipped in lukewarm water and

soap.

Never exaggerate with doses.

Normal detergents already

contain deliming agents. Only if

the water is particularly hard,

that is, rich in lime content, do

we recommend the use of a

specific product at every wash.

A periodical wash cycle with a

dose of a deliming product,

without detergents or washing,

may prove useful.

Never use too much detergent

or additives because this could

cause an excess amount of

foam, scaling and possible

damage to the component parts

of your washer-dryer.

When in need, check the pump and the rubber hose.

The washer-dryer comes equipped with a self-cleaning pump that does not require any cleaning or maintenance.

Small objects may accidentally fall into the pump: coins, hair clips, loose buttons and other small items. To avoid

possible damage, they are withheld in an accessible pre-chamber, situated at the lower end of the pump.

It is important to wash

the detergent dispenser

regularly.

To prevent dried washing

powder from

accumulating, place the

dispenser under running

water for a few minutes.

Do not forget to empty all pockets: small objects can

cause damage to your washer-dryer.

Attention: Before attempting to examine this pre-chamber, first

ensure that the machine has finished its programme and is empty.

Unplug the machine, as with any maintenance.

To gain access gently ease down the top of the plinth panel situated at

the base of the machine, with a screwdriver etc, to release it. Then

ease the top edge forward to allow it to be lifted clear (Fig. 1). Place

a shallow dish or tray below the cover of the pre-chamber to catch

the small amount of water present. Release the cover by turning anti-

clockwise (Fig. 2). Ensure that the cover is securely replaced.

Re-fit the plinth cover by inserting the hooks on its lower edge into

the slots and ease the top edge back into position.

The water inlet hose

Check the rubber hose at least once a year. If you see any cracks, replace it immediately. When you use your washer-dryer,

water pressure is very strong and a cracked tube could easily split open.

Fig. 1

Fig. 2

Instructions for installation and use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit WD10 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info