Bedienungsanleitung Infiniti QX70 - 2013 (Seite 504 von 522) (Englisch)

617770

504

Zoom out

Zoom in

Vorherige Seite

1/522

Nächste Seite

to the hitch, not to the vehicle bumper or

axle. The safety chains can be attached to

the bumper if the hitch ball is mounted to

the bumper. Be sure to leave enough slack

in the chains to permit turning corners.

Trailer lights

GUID-1CCD0FE7-6819-4DAE-9A10-4FBDB197405F

CAUTION

When splicing into the vehicle electrical

system, a commercially available power-

type module/converter must be used to

provide power for all trailer lighting. This

unit uses the vehicle battery as a direct

power source for all trailer lights while

using the vehicle tail light, stoplight and

turn signal circuits as a signal source. The

module/converter must draw no more than

15 milliamps from the stop and tail lamp

circuits. Using a module/converter that

exceeds these power requirements may

damage the vehicle’s electrical system.

See a reputable trailer retailer to obtain

the proper equipment and to have it

installed.

Trailer lights should comply with federal

and/or local regulations. For assistance in

hooking up trailer lights, contact an

INFINITI retailer or reputable trailer retailer.

Trailer brakes

GUID-7D6F63F5-C497-4498-A3A7-FFED19AE74DC

If your trailer is equipped with a braking

system, make sure it conforms to federal

and/or local regulations and that it is

properly installed.

WARNING

Never connect a trailer brake system directly

to the vehicle brake system.

Pre-towing tips

GUID-A9F812AA-6192-4A97-A335-073B5E83EAD3

. Be certain your vehicle maintains a level

position when a loaded or unloaded

trailer is hitched. Do not drive the

vehicle if it has an abnormal nose-up

or nose-down condition; check for

improper tongue load, overload, worn

suspension or other possible causes of

either condition.

. Always secure items in the trailer to

prevent load shift while driving.

. Keep the cargo load as low as possible

in the trailer to keep the trailer center of

gravity low.

. Load the trailer so approximately 60%

of the trailer load is in the front half and

40% is in the back half. Also make sure

the load is balanced side to side.

. Check your hitch, trailer tire pressure,

vehicle tire pressure, trailer light opera-

tion, and trailer wheel lug nuts every

time you attach a trailer to the vehicle.

. Be certain your rearview mirrors con-

form to all federal, state or local

regulations. If not, install any mirrors

required for towing before driving the

vehicle.

. Determine the overall height of the

vehicle and trailer so the required

clearance is known.

Trailer towing tips

GUID-A56A6796-0DF9-46D0-8CEF-51C968947BE3

In order to gain skill and an understanding

of the vehicle’s behavior, you should

practice turning, stopping and backing up

in an area which is free from traffic.

Steering stability, and braking perfor-

mance will be somewhat different than

under normal driving conditions.

. Always secure items in the trailer to

prevent load shift while driving.

. Lock the trailer hitch coupler with a pin

or lock to prevent the coupler from

Technical and consumer information 9-25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Infiniti QX70 - 2013 Seite 504

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info