Bedienungsanleitung InFocus IN105 (Seite 10 von 55) (Englisch)

540584

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Positioning your projector10

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video

format all factor into the resulting projected image size.

4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9

(widescreen) aspect ratio image, the projector can resize and scale a widescreen

image to the projector's native aspect width. This will result in a proportionally

smaller height equivalent to 75% of the projector's native aspect height.

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image

displayed by this projector. This will be seen as darkened (unlit) bars along the top

and bottom (vertical 12.5% height respectively) of the 4:3 projection display area

whenever displaying a scaled 16:9 aspect image in the vertical center of the 4:3

projection display area.

The projector should always be placed horizontally level (like flat on a table), and

positioned directly perpendicular (90° right-angle square) to the horizontal center of

the screen. This prevents image distortion caused by angled projections (or

projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reel-

to-reel film projectors did). Instead, digital projectors are designed to project at a

slightly upward angle above the horizontal plane of the projector. This is so that

they can be readily placed on a table and will project forward and upwards onto a

screen positioned so that the bottom edge of the screen is above the level of the

table (and everyone in the room can see the screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so that it

projects at a slightly downward angle.

You can see from the diagram on page 12, that this type of projection causes the

bottom edge of the projected image to be vertically offset from the horizontal plane

of the projector. When ceiling mounted, this refers to the top edge of the projected

image.

If the projector is positioned further away from the screen, the projected image size

increases, and the vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account

for both the projected image size and the vertical offset dimension, which are

directly proportional to the projection distance.

InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in

determining the ideal location for your projector. There are two dimensions to

consider, the perpendicular horizontal distance from the center of the screen

(projection distance), and the vertical offset height of the projector from the

horizontal edge of the screen (offset).

4:3 aspect image in a 4:3

aspect display area

16:9 aspect image scaled to a 4:3

aspect display area

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

InFocus IN105 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von InFocus IN105

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info