Bedienungsanleitung Infocus IN1118HD (Seite 28 von 36) (Englisch)

667077

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

To enter the PIN at projector startup:

Power up the projector. The “Enter PIN” dialog box appears after the startup

screen. Enter the default PIN (Left/Right/Up/Down) or the new PIN if it has

been changed, using the arrow buttons on the remote or keypad. See the

description above for instructions.

To change the PIN:

Select “Change PIN...” in the Advanced Menu > Setup > PIN settings menu.

Enter the existing PIN. Enter the new PIN twice. Do not forget the new PIN.

Contact InFocus Support to recover a projector with a forgotten PIN.

Power

Power Saving Mode: When the Power Saving Mode is On and the projector is

in standby (powered off but connected to AC power) and the Audio Out

function will not work.

AC Power On: When this feature is enabled, the projector automatically

turns on when power is connected. This allows control of ceiling mounted

projectors with a wall power switch.

Instant Power On: When this feature is enabled and it has been less than 1

minute since the projector was powered down, you can turn the projector

back on immediately. When this feature is disabled, you will need to wait for

the projector lamp to completely cool before restarting the projector.

Eco Blanking: When this feature is enabled and no video source is sensed,

70% of lamp power is saved and no image is shown. When the video source is

again applied, the image is shown immediately.

Source

Auto Source: When this feature is On, the projector automatically finds the

active source, checking the selected Power-up Source first. When this feature

is Off, the projector defaults to the source selected in Power-up Source. To

display another source, you must manually select one by pressing the Source

button on the remote or keypad and selecting one from the displayed Source

menu.

Power-up Source: determines which source the projector checks first for

active video during power-up.

Search Screen: allows you to display a blank screen instead of the default

screen at startup, and when no source is detected.

Timer

Auto Off Time: automatically turns the projector off after no signals are

detected for a preset number of minutes. If an active signal is received before

the projector powers down, the image will be displayed.

High Altitude Setting

High Altitude: We recommend you turn on the High Altitude Mode when

your environment is between 5000' (1500m) and 10,000' (3000m) above sea

level.

Status/Service:

Source Info: a read-only display of current source settings.

Projector Info: a read-only display of current projector settings and lamp

hours.

Reset Lamp Hours...: resets the lamp hours used counter in the Projector Info

menu to zero. Do this only after changing the lamp.

Factory Reset...: restores all settings to their default.

Service Code...: only used by authorized service personnel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Infocus IN1118HD Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info