Bedienungsanleitung Infocus In112aT (Seite 8 von 36) (Englisch)

544027

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Positioning the projector

To determine where to position the projector, consider the size and shape of your

screen, the location of your power outlets, and the distance between the

projector and the rest of your equipment. Here are some general guidelines:

• Position the projector on a flat surface at a right angle to the screen. IN112a/

IN112aT and IN114a/IN114aT must be at least 45.3” (1.2m) from the projection

screen, IN116a must be at least 55.4” (1.4m) from the projection screen, and

IN114STa must be at least 15” (0.4m) from the projection screen.

• If you are installing the projector on the ceiling, we stro

ngly recommend using

InFocus approved ceiling mounts for proper fitting, ventilation and installation.

Refer to the installation guide that comes with the InFocus Ceiling Mount Kit (p/n

PRJ-MNT-UNIV) for more information. The warranty does not cover any damage

caused by use of non-approved ceiling mount kits or by installing in an improper

location. To turn the image upside down, see “Ceiling mount” on page 27. We

recommend using an InFocus authorized ceiling mount.

• Position the projector the desired distance from the screen. The distance from

the

lens of the projector to the screen and the video format determine the size of

the projected image.

Model Minimum Distance to Screen Offset Offset for 60in. Image

IN112a 45.3"/1.2m 15%+-5% 9"/22.9cm

IN112aT 45.3"/1.2m 15%+-5% 9"/22.9cm

IN114a 45.3"/1.2m 15%+-5% 9"/22.9cm

IN114aT 45.3"/1.2m 15%+-5% 9"/22.9cm

IN114STa 15"/0.4m 15%+-5% 9"/22.9cm

IN116a 55.4"/1.4m 13%+-5% 7.8"/19.8cm

60 inches

high image

bottom of image 9

inches above center

of lens

Projection angle

lens center

Table 1: IN112a/IN112aT (SVGA)/IN114a/IN114aT(XGA) Screen size

Throw Ratio = 1.9 to 2.2

Diagonal Screen

Size (inches/m)

Size of the

ojected Image

Width

(inches/m)

Distance to screen

Minimum distance

(inches/m)

Maximum distance

(inches/m)

40”/1.0m 32”/0.8m 62”/1.6m 69”/1.7m

60”/1.5m 48”/1.2m 94”/2.4m 103”/2.6m

80”/2.0m 64”/1.6m 125”/3.2m 137”/3.5m

100”/2.5m 80”/2.0m 156”/4.0m 172”/4.4m

150”/3.8m 120”/3.0m 234”/5.9m 257”/6.5m

Table 2: IN114STa (XGA) Screen size

Throw Ratio = 0.61

Diagonal Screen

Size (inches/m)

Size of the

ojected Image

Width

(inches/m)

Distance to screen (inches/m)

40”/1.0m 32”/0.8m 20”/0.5m

60”/1.5m 48”/1.2m 30”/0.8m

80”/2.0m 64”/1.6m 40”/1.0m

100”/2.5m 80”/2.0m 50”/1.3m

150”/3.8m 120”/3.0m 75”/1.9m

Table 3: IN116a (WXGA) Screen size

Throw Ratio = 1.5 to 1.8

Diagonal Screen

Size (inches/m)

Size of the

ojected Image

Width

(inches/m)

Distance to screen

Minimum distance

(inches/m)

Maximum distance

(inches/m)

45”/1.1m 38”/1.0m 55.4”/1.4m 69.3”/1.8m

60”/1.5m 51”/1.3m 74.5”/1.9m 92.9”/2.4m

80”/2.0m 68”/1.7m 100.0”/2.5m 124.4”/3.2m

100”/2.5m 85”/2.2m 125.5”/3.2m 155.8”/4.0m

150”/3.8m 128”/3.2m 189.2”/4.8m 234.6”/6.0m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Infocus In112aT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Infocus In112aT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info