Bedienungsanleitung InFocus IN114ST (Seite 27 von 35) (Englisch)

538184

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Advanced Menu

Image:

3D Control:

3D Control: allows you

to enjoy 3D (stereoscopic) content. Your projector

supports two synchronization modes (External Sync and DLP Link™) for con-

trolling LCD shutter glasses. In addition to the

projector, you will need a pair

of 3D shutter glasses, 3D content, and 3D compatible source (and emitter).

Ensure the glasses you choose are consistent with the synchronization mode

you will be using.

3D Sync Invert: (Only applies when 3D control

is set to DLP Link™.) If the

image appears to flutter, look odd or if the image depth looks off or you expe-

rience eye strain, turn this feature on to see if the image improves.

Color...

Color:

adjusts a video image from black and white to fully saturated color. The

color setting applies to video sources only.

Red/Green/Blue Gain:

adjusts the gain of the red, green or blue channel of the

image.

Red/Green/Blue Offset: adjusts the of

fset of the red, green or blue channel of

the image.

Color Space:

applies to computer and component video sources. It allows you

to select a color space that has been specifically tuned for the input signal.

When Auto is selected, the projector automatically determines the standard. To

choose a different setting, turn off Auto, then choose RGB for computer

sources or choose either REC709 or REC601 for component video sources.

Color Temperature:

changes the intensity of the colors. Select a listed relative

warmth value.

Gamma: se

lect the appropriate gamma from among Video, Film, Bright, and

CRT.

Tint:

adjusts the red-green color balance in the image of NTSC video images.

The tint setting applies to NTSC video sources only.

White Intensity: increases

the brightness of whites that are near 100%.

PC:

Force Wide:

when this is off, the analog locking algorithms choose the stan-

dard mode resolution (4:3) as the preferred default resolution. When this is on,

the analog locking algorithms choose wide mode resolution (16:10) as the pre-

ferred default resolution.

Phase:

adjusts the horizontal phase of a computer source.

Prevent PC Screen Saver: p

revents your computer from going into Screen

Save mode. The projector must be connected to the PC via a USB cable for

this feature to work.

Sync Threshold: (progressive signals

only) If a hardware device, such as a

DVD player, is not syncing properly with the projector, select this option to

help it to sync when connected to the projector.

Tracking: adjusts the

vertical scan of a computer source.

Horizontal/Vertical Position:

adjusts the position of a computer source.

Video:

Detect Film: determines whether the original source of the input video was

film (progressive) or video (interlaced).

Overscan:

removes noise around the video image.

Set Black Level: analyzes

the current input image and calculates an offset

value which is then added to the analog to digital converter black level value.

This ensures optimum black level for each analog source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

InFocus IN114ST Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von InFocus IN114ST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info