Bedienungsanleitung Infocus IN114STa (Seite 28 von 36) (Englisch)

544025

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Advanced Menu

Image:

3D Control:

3D: allow

s you to enjoy 3D (stereoscopic) content. Your projector supports

Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-by-Side for con-

trolling LCD shutter glasses. In addition to the projector, you will need a pair

f 3D shutter glasses, 3D content, and 3D compatible source (and emitter).

Ensure the glasses you choose are consistent with the synchronization mode

you will be using.

3D Sync Invert: If the

image appears to flutter, look odd or if the image depth

looks off or you experience eye strain, turn this feature on to see if the image

improves.

Color...

Color: a

djusts a video image from black and white to fully saturated color.

The color setting applies to video sources only.

Red/Green/Blue Gain: adjusts the

gain of the red, green or blue channel of the

image.

Red/Green/Blue Offset: adjusts the offse

t of the red, green or blue channel of

the image.

Color Space: appl

ies to computer and component video sources. It allows

you to select a color space that has been specifically tuned for the input signal.

When Auto is selected, the projector automatically determines the standard.

To choose a different setting, turn off Auto, then choose RGB for computer

sources or choose either REC709 or REC601 for component video sources.

Color Temperature:

changes the intensity of the colors. Select a listed rela-

tive warmth value.

Gamma: s

elect the appropriate gamma from among Video, Film, Bright, and

CRT.

Tint: adjust

s the red-green color balance in the image of NTSC video images.

The tint setting applies to NTSC video sources only.

White Intensity: i

ncreases the brightness of whites that are near 100%.

PC:

Force Wide: when

this is off, the analog locking algorithms choose the stan-

dard mode resolution (4:3) as the preferred default resolution. When this is

on, the analog locking algorithms choose wide mode resolution (16:10) as the

preferred default resolution.

Phase: adjust

s the horizontal phase of a computer source.

Prevent PC Screen Saver:

prevents your computer from going into Screen

Save mode. The projector must be connected to the PC via a USB cable for

this feature to work.

Sync Threshold: (progressive

signals only) If a hardware device, such as a

DVD player, is not syncing properly with the projector, select this option to

help it to sync when connected to the projector.

Tracking:

adjusts the vertical scan of a computer source.

Horizontal/Vertical Position: a

djusts the position of a computer source.

Video:

Detect Film: determines whether the original source of the input video was

film (progressive) or video (interlaced).

Overscan: rem

oves noise around the video image.

Set Black Level: anal

yzes the current input image and calculates an offset value

which is then added to the analog to digital converter black level value. This

ensures optimum black level for each analog source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Infocus IN114STa Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Infocus IN114STa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info