Bedienungsanleitung InFocus IN116 (Seite 7 von 35) (Englisch)

476273

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Positioning the projector

To determine where to position the projector, consider the size and shape of your

screen, the location of your power outlets, and the distance between the projector

and the rest of your equipment. Here are some general guidelines:

• Position the projector on a flat

surface at a right angle to the screen. The IN112

and IN114 must be at least 45.3” (1.2m) from the projection screen, the

IN114ST must be at least 31” (.8m) from the projection screen, and the IN116

must be at least 55.4” (1.4m) from the projection screen.

• If you are installing the projector on the ceiling, we strongly recommend using

InFocus approved ceiling mounts for proper fitting, ventilation and

installation. Refer to the installation guide that comes with the InFocus Ceiling

Mount Kit (p/n PRJ-MNT-UNIV) for more information. The warranty does

not cover any damage caused by use of non-approved ceiling mount kits or by

installing in an improper location. To turn the image upside down, see “Ceiling

mount” on page 27. We recommend using an InFocus authorized ceiling

mount.

• Position the projector the de

sired distance from the screen. The distance from

the lens of the projector to the screen and the video format determine the size

of the projected image.

• The image offset for the IN112/IN114/IN1

14ST is

115% +/-5%. This means

that if you have an image 60 inches (1.5 meters) tall from a table-mounted

projector, the bottom of the image will be 9 inches (22.9 cm) above the

centerline of the lens. The image offset for the IN116 is 113% +/-5%. This

means that if you have an image 60 inches (1.5 meters) tall from a table-

mounted projector, the bottom of the image will be 7.8 inches (19.8 cm) above

the centerline of the lens.

60 inches

high image

bottom of image 9

inches above center

of lens

Projection angle

lens center

Table 1: IN112 (SVGA)/IN114 (XGA) Screen size

Diagonal Screen

Size (inches/m)

Size of the

Projected Image

Width

(inches/m)

Distance to screen

Minimum

distance

(inches/m)

Maximum

distance

(inches/m)

30”/0.8m 24”/0.6m 45.3”/1.2m 50.6”/1.3m

60”/1.5m 48”/1.2m 92.2”/2.3m 102.9”/2.6m

80”/2.0m 64”/1.6m 123.5”/3.1m 137.7”/3.5m

100”/2.5m 80”/2.0m 154.8”/3.9m 172.5”/4.4m

150”/3.8m 120”/3.0m 233.0”/5.9m 259.6”/6.6m

Table 2: IN114ST (XGA) Screen size

Diagonal Screen

Size (inches/m)

Size of the

Projected Image

Width

(inches/m)

Distance to screen

Minimum

distance

(inches/m)

Maximum

distance

(inches/m)

65”/1.6m 52”/1.3m 31”/.8m 65”/1.6m

81”/2.1m 65”/1.6m 39”/1.0m 81”/2.1m

100”/2.5m 80”/2.0m 48”/1.23m 100”/2.5m

120”/3.0m 96”/2.4m 58”/1.48m 120”/3.0m

150”/3.8m 120”/3.0m 73”/1.85m 150”/3.8m

Table 3: IN116 (WXGA) Screen size

Diagonal Screen

Size (inches/m)

Size of the

Projected Image

Width

(inches/m)

Distance to screen

Minimum

distance

(inches/m)

Maximum

distance

(inches/m)

45”/1.1m 38”/1.0m 55.4”/1.4m 69.3”/1.8m

60”/1.5m 51”/1.3m 74.5”/1.9m 92.9”/2.4m

80”/2.0m 68”/1.7m 100.0”/2.5m 124.4”/3.2m

100”/2.5m 85”/2.2m 125.5”/3.2m 155.8”/4.0m

150”/3.8m 128”/3.2m 189.2”/4.8m 234.6”/6.0m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

InFocus IN116 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von InFocus IN116

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info