Bedienungsanleitung InFocus in126 (Seite 28 von 36) (Englisch)

536691

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Advanced Menu

Image:

3D Control:

3D Control: allows you

to enjoy 3D (stereoscopic) content. Your projector

supports two synchronization modes (External Sync and DLP Link™) for

controlling LCD shutter glasses. In addition to the projector, you will need a

pair of 3D shutter glasses, 3D content, and 3D compatible source (and emit-

ter). Ensure the glasses you choose are

nsistent with the synchronization

mode you will be using.

3D Sync Invert: (Only applies wh

en 3D control is set to DLP Link™.) If the

image appears to flutter, look odd or if the image depth looks off or you

experience eye strain, turn this feature on to see if the image improves.

Color...

Color: a

djusts a video image from black and white to fully saturated color.

e color setting applies to video sources only.

Red/Green/Blue Gain: adjusts the gain of

the red, green or blue channel of the

image.

Red/Green/Blue Offset: adjusts the offse

t o

f the red, green or blue channel of

the image.

Color Space: applies to c

omputer and component video sources. It allows

you to select a color space that has been specifically tuned for the input signal.

When Auto is selected, the projector automatically determines the standard.

To choose a different setting, turn off Auto, then choose RGB for computer

sources or choose either REC709 or REC601 for component video sources.

Color Temperature:

changes the

intensity of the colors. Select a listed rela-

tive warmth value.

Gamma: s

elect the appropriate gamma from among Video, Film, Bright, and

CRT.

Tint: adjusts the

red-green color balance in the image of NTSC video images.

The ti

nt setting applies to NTSC video sources only.

White Intensity: increases th

e brightness of whites that are near 100%.

PC:

Force Wide: when this

is off, the analog locking algorithms choose the stan-

dard mode resolution (4:3) as the preferred default resolution. When this is

on, the analog locking algorithms choose wide mode resolution (16:10) as the

preferred default resolution.

Phase: adjust

s the horizontal

phase of a computer source.

Prevent PC Screen Saver: preve

nts your computer from going into Screen

Save mode. The projector must be connected to the PC via a USB cable for

this feature to work.

Sync Threshold: (progressive

signals only) If a hardware devi

ce, such as a

DVD player, is not syncing properly with the projector, select this option to

help it to sync when connected to the projector.

Tracking:

adjusts the vertical scan of a computer source.

Horizontal/Vertical Position: adjus

ts the position of a computer source.

Video:

Detect Film: determines whether the original source of the input video was

film (progressive) or video (interlaced).

Overscan: rem

ove

s noise around the video image.

Set Black Level: analyzes

the current input image and calculates an offset value

which is then added to the analog to digital converter black level value. This

ensures optimum black level for each analog source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

InFocus in126 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von InFocus in126

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info