768082
18
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
18
EN
LIST OF COMPONENTS
g. 1
A Support foot
B Support foot positioning indicator
C Release lever
D Isox connectors
E Red/green indicators for base hooking on the car seat
F Support foot height adjustment lever
G Red/green indicators for hooking the seat on the base
H Isox connectors release buttons
K Isox anchoring points on the car seat
J Isox connector protection plugs
IMPORTANT
Verify where the Isox anchoring points are positioned on the seat of the car and
check that they are free from any materials that could prevent their correct use.
Verify that on the seat of the car there are not any items that may hinder the
correct leaning of the car base to the seat.
Verify that the oor of the car is free from any materials that may hinder the correct
grip of the support foot.
Verify that the backrest is in vertical position and the seat where the car base has
to be installed is NOT EQUIPPED WITH FRONT AIRBAG.
Install the Huggy Isox base exclusively in THE OPPOSITE DIRECTION TO THE
DRIVING ONE.
POSITIONING AND INSTALLATION OF THE INGLESINA HUGGY CAR SYSTEM
g. 2 Extract the support foot (A) from beneath the car base until the suitable
indicator (B) signals GREEN.
g. 3 Act on the release lever (C) and simultaneously extract the Isox
connectors (D) from the car base completely.
g. 4 Remove the protection plugs (J) from the base Isox connectors by
pressing the two release buttons (H).
g. 5 Fasten the base connectors (D) to the seat Isox anchoring points (K) until
hearing clearly both CLICK sounds signalling the occurred hooking.
g. 6 CAUTION: the correct hooking of the Huggy Isox base occurs when
the proper indicators (E) from RED become GREEN.
g. 7 Check that the Huggy Isox base is properly hooked on both sides.
g. 8 Adjust the height of the support foot (A) acting on the proper lever (F)
until touching the car oor. Release the lever (F) making sure that the extensible
part of the support foot remains blocked in its position.
CAUTION: it is important that the foot is rmly leaning on the car oor also if
the base is slightly lifted from the seat.
g. 9 Install the Huggy Multix or Huggy Prime car seat on the Huggy Isox
base until hearing on both sides the CLICK signalling the occurred hooking.
INSTRUCTIONS
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Inglesina Isofix car base for Huggy Multifix wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info