Bedienungsanleitung Inglesina Twin Sketch (Seite 17 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

768078

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

damp cloth and mild soap; do not use solvents, ammonia or

bleach.

Do not use abrasive cleaners or scrubbing pads.

• Follow the lining washing instructions on the labels.

Do not bleach

Do not tumble dry

Dry at in shade

Do not iron

Do not dry clean

Do not spin-dry

• Dry the textile lining completely before using or storing it.

LIST OF COMPONENTS

g. 1

A Hoods

B Handrails

C Storage baskets

OPENING THE STROLLER

g. 2 To open the stroller, release the hook (P1) that

ensures its folding and unbutton the 2 press studs (P2) that

hold the backrest of both seats to the structure.

g. 3 Holding the handle rmly on both sides, lift the

stroller until the correct opening click is heard.

REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLIES

In case of need, the front wheel assemblies (D) can be easily

removed.

g. 4 To remove them, pull them out from the front

supports while holding down the lever (D1).

g. 5 To reinstall them, simply position them and push

until they clicks into place.

g. 6 Caution: make sure that the wheels are properly

attached before use.

REMOVING/ATTACHING THE REAR WHEELS

Should it be necessary, the rear wheels (E) can easily be

removed.

g. 7 To remove them, pull them out from the rear

support while holding down the button (E1).

g. 8 To reinstall them, simply position them and push

them until they click into place.

g. 9 Caution: make sure that the wheels are properly

attached before use.

REAR WHEELS BRAKE

g. 10 To operate the brake, use the rear lever (P3).

Always engage the brake during stops.

HANDRAIL

g. 11 Both handrails (B) can be open on one side or fully

removed; to open them, press the button (B1) and remove

them from their housings; to remove them, repeat the

procedure on the other side.

BACKRESTS ADJUSTING

g. 12 To lower the backrests, release the rear strap on

both by pressing the button (P4) on the central device (P5).

g. 13 To lift them, press the button (P4) on the central

device (P5) and simultaneously pull the rear ring (P6).

SAFETY BELTS

g. 14 Ensure that the safety belts are inserted in the slots

at the height of the shoulders or immediately above. If the

position is not correct, remove the belts from a pair of slots

and reinsert them in another one; always use the slots at the

same height.

g. 15 To move the back straps from one pair of slots to

the other, open the back zip (P7) on the backrest and remove

the back straps through the corresponding holes, on the

internal rigid reinforcement (P8).

g. 16 Then insert the back straps into the other pair of

slots on the backrest and pass through the corresponding

holes on the internal rigid reinforcement (P8).

g. 17 Make sure that the back strap is properly inserted

in the ends of the waist one (P9).

g. 18 Fasten the ends of the waist belt to the central

buckle (P10).

g. 19 Always use the crotch strap (P11) in combination

with the waist strap, making sure that they are all well

adjusted around the baby.

Caution! Failure to comply with this precaution can cause

the baby to fall or slide out, with serious injury risks.

Caution: adapt the height and the length of the harness

according to the baby’s growth.

HOODS

g. 20 To adjust the hoods, simply accompany them to

the desired position.

g. 21 The hood features a fabric insert that extends the

degree of cover, improving protection from the sun.

HOOD LININGS MAINTENANCE

The hood linings can be removed to allow for their correct

maintenance.

The lining removal way is the same for both hoods.

g. 22 To remove it, unbutton both rear press studs (A1).

g. 23 Unbutton the 2 press studs (A2) that x the hood to

the structure of the stroller and detach the side velcro (A3).

g. 24 Open the internal zip (A4) and free the lining from

the xed rear rib (A5).

g. 25 Use a screwdriver (or similar tool, not included)

to operate the lever (A6) placed on the hood joint and

simultaneously remove the front rib (A7) from its housing.

g. 26 Now remove the entire hood lining.

INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inglesina Twin Sketch Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info