Bedienungsanleitung Innoliving INN-303 (Seite 10 von 20) (Englisch, Italienisch)

801046

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

INN-303 STEAM STERILIZER 4 IN 1

MAIN FUNCTIONS

• Sterilizer: the unit sterilizes baby bottles, rubber

teats and small accessories resisting to high tem-

peratures.

• Baby bottle warmer

• Baby food jar warmer

• Fruits and vegetables steam cooking

• Defrosting function

IMPORTANT ADVISES BEFORE USING

THE APPLIANCE

WARNING: in order to prevent skin burns, you

must never open the sterilizer lid or the steam co-

ver while the product is on. Never put your hand

or ngers inside the steam cover hole.

In order to avoid skin burns, before proceeding

with the product cleaning, it is necessary to let

the unit cooling down for about 20 minutes.

Between every 20 minutes usage, it is necessary

to let the unit cooling down for 20 minutes.

N.B. In case in the last product usage, the ste-

aming cycle (of any function) was interrupted

unplugging the unit from the mains, when you

plug the unit again, the LED is automatically ON

and the product starts functioning immediately

(that it is to say, without pressing the ON button).

STERILIZER

Place the product base (1) on a at and stable

surface.

Insert the racket (10 or 10 a) inside the sterilizer

container (11), following the guides inside the

container.

Racket 10 can hold up to 6 standard baby bottles

(upside down) and small accessories; racket 10a

can hold up to 5 non-standard baby bottles. In case

you should sterilize non-standard baby bottles or

other containers, please remove the racket and

insert the object directly inside the container (11)

Note: before sterilizing any object, it is necessary

to wash and rinse them carefully.

Pour 90ml water (2 x 45cc measuring cups) in the

water bowl (4), using the measuring cup (3 a).

Note: 90ml of water grants a sterilizing cycle of 15

minutes.

Put the container with the units to be sterilised

inside, on the product base; close the container

with its lid (9).

Connect the main unit (1) to the mains.

Switch on the device by sliding “ON/OFF switch

(13) to “ON” position.

Press the ON switch (2) downwards; the LED lights

up (5) and the sterilizing cycle starts.

IMPORTANT. Beware of hot steam from the

steam vent.

Sterilizing cycle lasts about 15 minutes (90ml of

water); once the water inside the water bowl has

ended the main unit stops functioning and the

LED switches itself o.

To end sterilization prematurely, slide ON/OFF

switch (13) to “OFF” position.

BEWARE! Switch the device o after every

sterilization procedure by sliding “ON/OFF”

switch to “OFF”. This stops appliance being

started accidentally.

Unplug the unit from the mains.

In order to avoid skin burns, before removing the

baby bottles and accessories from the container

please wait some minutes.

BABY BOTTLE WARMER

Place the product base (1) on a at and stable

surface.

Pour 45ml water (1 measuring cup) in the water

bowl (4), using the measuring cup (3 a).

Note:

- 45ml of water grants a warming cycle of 7 minutes.

- 90ml of water grants a warming cycle of 15 minutes.

Place the racket (12) on the product base (1) and

close with the steam cover (7); for standard baby

bottles, please add the adaptor ring (8)

In order to improve the product performance, it

is advisable to add the adaptor ring for standard

baby bottles. In case of non-standard baby bot-

tles please do not use the adaptor ring.

Insert the baby bottle inside the steam cover.

Connect the main unit (1) to the mains.

Switch on the device by sliding “ON/OFF switch

(13) to “ON” position.

Press the ON switch (2) downwards; the LED lights

up (5) and the warming cycle starts.

Warming cycle lasts about 7/8 minutes (45ml of

water); once the water inside the water bowl has

ended the main unit stops functioning and the

LED switches itself o.

To end sterilization prematurely, slide ON/OFF

switch (13) to “OFF” position.

Beware! Switch the device o after every steri-

lization procedure by sliding “ON/OFF” switch

to “OFF”. This stops appliance being started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Innoliving INN-303 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info