Bedienungsanleitung Innoliving INN-555 (Seite 20 von 24) (Englisch, Italienisch)

800575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Make sure that the puriﬁer is powered and the smartphone is connected to the WiFi

network:

press the Fan Speed button for 4 seconds, wait for the “beep” and then release it: this

means that the device is ready to pair with the smartphone.

• Open the “Tuya” APP and press “+” at the top right of the APP. Select the type of device

you want to connect, press “Small appliances” and press “Air puriﬁer”, then enter the

password of the WiFi network to which the smartphone is connected and set the connection

to 2.4 GHz. Then press “Next” to connect to the puriﬁer.

• When, after the pairing process, the message “Adding 1 device successful” is shown, it

means that the connection is complete and the device will be listed in the list of devices

associated with the APP.

3. Add Devices in AP Mode

If failed in Easy Mode, users could also add devices in AP Mode.

• Press the Fan Speed button for 4 seconds seconds until the puriﬁer emits a “beep” and

the WiFi indicator light starts ﬂashing quickly, then press the fan Speed button for another

4 seconds until another “beep” sounds “and the indicator light starts ﬂashing slowly, this

means that the puriﬁer is ready for conﬁguration in AP mode.

• Press “+” at the top right of the APP. Select “Small Appliance”. Then enter the password of

the internet network (2.4GHZ) and select “AP Mode” at the top right, press “Connect now”

to enter the WLAN settings interface in the smartphone and select the WiFi network named

“Tuya_XXXX” and connect to this.

• Go back to the “Tuya” APP, the connection will start automatically.

• When “Added 1 device successfully” is displayed, it means the connection is completed

and the device will be listed in the APP list.

Now you can control the puriﬁer via the APP anytime and anywhere (make sure your

smartphone and puriﬁer are both connected to the internet). You can share devices with

friends or family after they are successfully added. It is also possible to change the device

name with a recognizable phrase or word such as “Innoliving puriﬁer”

4. Q&A

Why was not possible to add the puriﬁer?

a. Make sure the puriﬁer is turned on and close to your smartphone during the connection

process between devices.

b. Make sure your smartphone is connected to the WiFi network and that the WiFi router is

working properly.

c. Make sure the puriﬁer is ready for setup. Refer to the product instructions “Add devices

in Easy Mode” or “Add devices in Access Point mode” for details.

d. Make sure that the connected devices have not reached the maximum number of WiFi

routers. If not, disconnect the network of some devices.

e. Make sure the WiFi network password is correct when adding a new puriﬁer.

f. Make sure you haven’t used Chinese characters to name the WiFi network.

Is it possible to manage a puriﬁer with a 2G / 3G / 4G / 5G network?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Innoliving INN-555 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info