Bedienungsanleitung Innoliving INN-558 (Seite 32 von 36) (Englisch, Italienisch)

800508

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

puriﬁer is ready for conﬁguration in AP mode.

• Press “+” at the top right of the APP. Select “Small Appliance”. Then enter the password of

the internet network (2.4GHZ) and select “AP Mode” at the top right, press “Connect now”

to enter the WLAN settings interface in the smartphone and select the WiFi network named

“Tuya_XXXX” and connect to this.

• Go back to the “Tuya” APP, the connection will start automatically.

• When “Added 1 device successfully” is displayed, it means the connection is completed

and the device will be listed in the APP list.

Now you can control the puriﬁer via the APP anytime and anywhere (make sure your

smartphone and puriﬁer are both connected to the internet). You can share devices with

friends or family after they are successfully added. It is also possible to change the device

name with a recognizable phrase or word such as “Innoliving puriﬁer”

4. Q&A

Why was not possible to add the puriﬁer?

a. Make sure the puriﬁer is turned on and close to your smartphone during the connection

process between devices.

b. Make sure your smartphone is connected to the WiFi network and that the WiFi router is

working properly.

c. Make sure the puriﬁer is ready for setup. Refer to the product instructions “Add devices

in Easy Mode” or “Add devices in Access Point mode” for details.

d. Make sure that the connected devices have not reached the maximum number of WiFi

routers. If not, disconnect the network of some devices.

e. Make sure the WiFi network password is correct when adding a new puriﬁer.

f. Make sure you haven’t used Chinese characters to name the WiFi network.

Is it possible to manage a puriﬁer with a 2G / 3G / 4G / 5G network?

When adding a puriﬁer for the ﬁrst time, your smartphone and puriﬁer must be connected

to the same WiFi network. After successfully adding the puriﬁer, the puriﬁer can be

remotely controlled with the 2G / 3G / 4G / 5G network.

How can I share the control of the puriﬁer with others?

Open the Tuya APP, select the puriﬁer and press the icon in the upper right corner. Press

“Device Sharing” and “Add Share”, then select the “country / region” to which the account

belongs and enter the “Account Number” (a phone number or email address) with which

you want to share the puriﬁer. (Make sure the phone number or email is registered.)

How can I manage the puriﬁer shared by others?

Open Tuya and choose the puriﬁer by pressing the product icon in the “Shared devices”

section on the home page.

How can the puriﬁer be removed?

Open the “Tuya” APP, select the puriﬁer and press the button in the upper right corner.

Press “More”. Then press “Remove Puriﬁer” at the bottom: the WiFi indicator light will start

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Innoliving INN-558 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info