738440
22
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
Step 33
3-Shroud Plate Connector Pins
Step 34
3- T Pins
Step 33: Slide a Shroud C Bracket into the pocket at one end of Shroud. (Pocket
seam should face inside). Work shroud around bracket until the opening in the
shroud lines up with the hole on the back of the bracket. Repeat this on the other
end of shroud.
Now position this shroud assembly around the upper and lower Shroud Mount
Plates by working around guide rods and stack. Align holes in the top and bottom
brackets with the holes in the plates and insert Shroud Plate Connector Pins in each
(3 at top and 3 at bottom).
Next, stretch the
shroud tight using the
2 knobs at the top,
turn counter clockwise
working between the
2 knobs to adjust
each side up a little at
a time.
Tightening Knobs
Step 34: The press
arm starting position
may be adjusted by
screwing press arm
stop in or out. Lock
with jam nut when
finished.
Adjust cable slack at
the upper single
floating pulley by
loosening bolt and
moving pulley up or
down with the
selector plate. Lock
tight with bolt
when finished.
Adjust the Stop at the Single Floating Pulley for
the leg extension to take slack out of the cable.
Set the cam so the cable opening is in line with the
2 small pulleys before adjusting. Tighten the Jam
Nut when finished.
PAGE 18
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Inspire M2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info