Bedienungsanleitung Instant Pot Duo V5 (Seite 6 von 15) (Englisch)

799414

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Get started

INITIAL SET UP

Clean before use

1. Wash the inner cooking pot with hot water and soap. Rinse and use

a soft cloth to dry the outside. Or you can wash the inner cooking

pot in the dishwasher.

2. Wipe the heating element inside the cooker base with a soft cloth

to ensure there are no stray packaging particles.

Setting up the condensation collector

The condensation collector sits at the back of the cooker base and

accumulates overflow moisture from the condensation rim. It should be

installed before cooking, then emptied and rinsed out after each use.

Remove the condensation collector

• Pull the condensation collector away from the cooker base; do not

pull down.

Note the tabs on the cooker base and the grooves on the condensation collector.

Install the condensation collector

• Align the grooves on the condensation collector with the tabs on

the back of the cooker base and slide the condensation collector

into place.

Using the Sealing Ring

When the pressure cooking lid is closed, the sealing ring installed on

the underside of the lid creates an air-tight seal between the lid and

the cooker base.

• The sealing ring must be installed before using the cooker and

should be cleaned after each use.

• Install 1 sealing ring at a time; use one for sweet dishes and one

for savory.

• Sealing rings stretch over time with normal use. To keep your

product safe, replace the sealing ring every 12 to 18 months.

Replace sooner if you notice stretching, deformation, or damage.

Install the Sealing Ring

1. Place the sealing ring over the sealing ring rack and press it into

place. Press down firmly to ensure there is no puckering.

2. The sealing ring should be snug and should not fall out when the

lid is turned over.

Remove the Sealing Ring

1. Grip the edge of the sealing ring and pull it out from behind the

sealing ring rack.

2. Inspect the rack to ensure it is secured, centered, and an even

height all the way around the lid. If the sealing ring rack is

deformed, do not try to repair it.

Plug in cord (3QT and 6QT models)

When you’re ready to use your Instant Pot Duo, plug the electrical cord

into the power socket on the back of the unit.

Note: the 8QT model has an electrical cord that is always connected to the unit.

Test run

Setting up your new Instant Pot Duo for a test run is a great way

to familiarize yourself with how the unit works before you actually

cook a meal.

To perform a test run:

1. Follow the instructions for pressure cooking on page 9 using the

Steam Smart Program.

2. Add water (but no food) as shown in ‘Using liquid to create steam’

on page 10.

3. Set the cooking time to 5 minutes.

4. After the cooking session is done, discard any remaining water.

5. Wash and dry the inner cooking pot.

Now you’re ready to cook a meal in your Instant Pot Duo!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Instant Pot Duo V5 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info