Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 53
Configuring LEAP Security on the 751
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your 751.
3 From Intermec Settings, choose Communications > 802.11 Radio >
Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA, to AES
if you choose WPA2, and to WEP if you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Exit Intermec Settings.
Configuring Static WEP Security With Funk Security
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your 751.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For 8021x, choose None.
8 Define a value for the keys you want to use. You can define up to four
keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long
depending on the capability of the radio. Set a 5-byte value for 64-bit
WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded
by 0x and contain 5 or 13 hex pairs.
9 For Transmit key, choose the key you want to use for transmitting data.
10 Exit Intermec Settings.
Configuring Funk Security Using the Profile Wizard
You can start 802.11 b/g communications on the 751 using the Profile
Wizard. A profile contains all the information necessary to authenticate you
to the network, such as login name, password or certificate, and protocols
by which the 751 is authenticated. You can have up to four profiles for
different networks. For example, you may have different login names or
passwords on different networks.
