Bedienungsanleitung Intermec 751G (Seite 61 von 156) (Englisch)

595574

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Chapter 3 — Configuring the Computer

751G Color Mobile Computer User’s Manual 47

Packaging Applications for the Computer

• You could package an application as a cabinet (cab) file. Recommended

• For simple applications, the application itself may be the file to deliver.

• It could be a directory structure that contains the application, supporting

files like ActiveX controls, DLLs, images, sound files, and data files.

Consider any of these when choosing a storage location for applications:

• In the 751G are two built-in storage options: the Object Store and the

Persistent Storage Manager (PSM). The Object Store is RAM that looks

like a disk. Anything copied here is deleted when a cold-boot is

performed on the unit. The PSM is an area of storage embedded in a

section of the system’s FLASH memory. This storage area is not erased

during a cold-boot, but it may be erased during the reflash. You also have

the option to store a persistent registry to the PSM region.

• If the optional Secure Digital storage card is in the system, then consider

this card the primary location to place applications installation files. The

“\SDMMC Disk” folder represents the Secure Digital card.

• Use the small non-volatile Flash File Store region to hold CAB files that

rebuild the system at cold-boot or install applications from a CAB file

into the Flash File Store so they are “ready-to-run” when a cold-boot is

performed. Since the FLASH in the system has a limited number of

write cycles, do not use the Flash File Store for excessive writing

purposes; however, reading is okay.

Files copied to any of these locations are safe when a cold-boot is performed

on a 751G — providing the AutoRun system is installed in the appropriate

location. You can find this system in the 751G Management Tools portion

of the Intermec Developer’s Library CD. Copying a cab file to the “\Flash

File Store\Persistent Copy\CabFiles” folder automatically extracts that cab

file on every cold-boot to ensure that your system is properly set up (see

“Installing Cabinet Files” on page 46).

Launching Your Application Automatically

You can configure the various media used in the Windows system with a

folder name and can change the media in the registry of the system. Many

of the startup components rely on folder names to locate information files,

applications, or other related data.

Note: This describes the system component startup for Intermec-provided

components only. It does not describe the bootstrap loader process. It only

describes the component installation process provided by Windows. It is

assumed that you understand the Microsoft Mobile startup procedures and

are familiar with how Microsoft components start up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intermec 751G Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info