Chapter 2 — Connecting and Configuring the CN4
54 CN4 Mobile Computer User’s Manual
b Subnet mask
c Default router
3 If necessary, set these parameters:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
4 Make sure that your CN4 is communicating with the network and
that the network can see your CN4. For more information, see
“Managing Network Connections With iConnect” on page 58.
Configuring Bluetooth Communications
Your CN4 is Bluetooth™ enabled, which lets you connect to other
Bluetooth devices, such as scanners, printers, or audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
Use Intermec Settings to enable the radio and configure other
Bluetooth settings as described next.
To turn on the Bluetooth radio and configure Bluetooth settings
1 Start Intermec Settings.
2 Choose Communications > Bluetooth.
3 Choose On from the Power menu. A message appears asking if you
want to save the new settings.
4 Choose Yes. Intermec Settings refreshes the settings and returns
you to the main menu.
5 (Optional) To make the CN4 visible to other Bluetooth devices,
choose Communications > Bluetooth and choose Enable from
the Discoverable menu.
To make the CN4 connectable to other Bluetooth devices that
discover it, choose Communications > Bluetooth and choose
Enable from the Connectable menu.
6 Click OK.
The Bluetooth radio maintains its state through a warm or cold boot
and maintains virtual COM ports. But, if you clean boot your CN4
you need to recreate pairings to devices.
