Chapter 7 — Configure the Computer
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 81
Configure LEAP Security With Funk
After you configure the communications and radio parameters on
your mobile computer and select Funk as your security choice, you can
configure LEAP.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk.
3 Select the profile you want to configure.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA,
AES if you choose WPA2, and WEP if you choose Open or
Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Enter a User Name and User Password.
8 Save your settings.
Configure Static WEP Security With Funk
After you configure the communications and radio parameters on
your mobile computer and select Funk as your security choice, you can
configure static WEP security with Funk. Intermec recommends that
you use WPA2-PSK instead of WEP if possible.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Select the profile you want to configure.
4 For Association, choose Open.
5 For Encryption, choose WEP.
6 For 8021x choose None.
7 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5- byte value for
