522371
43
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
45
User Manual
Output Sentences
The chart plotter allows customizing the NMEA-0183 sentence transmitted on
each port. Each port can transmit a different set of sentences among: GLL, VTG,
BOD, XTE, BWC, RMA, RMB, RMC, APB, WCV, GGA, HSC, HDG:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Port 1/2/3
(CM 11CV+/11CVS+: ports 4/5 too) Output Sentences" + [ENTER]
NMEA Data Input
Allows the chart plotter to act as a computer terminal and display the incoming
data exactly as it is received:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "NMEA Data
Input" + [ENTER]
CM 169CS/169CSi/7Mi/7Ci/7MX/7CXS:
Cable Wiring page
Shows a window containing the cable wiring related to the quick disconnect bracket:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Cable Wiring"
+ [ENTER]
CM V6/V6i/11CV+/11CVS+:
Power I/O Cable Wiring page
Shows a window containing the Power I/O cable wiring.
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Power I/O
Cable Wiring" + [ENTER]
CM V6/11CV+/11CVS+:
GPS Cable Wiring page
Shows a window containing the GPS cable wiring.
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "GPS Cable
Wiring" + [ENTER]
CM 11CV+/11CVS+:
AUX IN I/O Cable Wiring page
Shows a window containing the interface cable wiring.
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "AUX IN I/O
Cable Wiring" + [ENTER]
Send/Receive Routes & Marks
Sets the desired port used for transferring User Points and Routes functions:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Send/Rec
Routes & Marks" + [ENTER] + "Port 1/2/3 (CM 11CV+/11CVS+: ports 4/5
too)" + [ENTER]
C-Link menu
Select the Primary or Secondary Station (see the dedicated Chapter):
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "C-LINK" +
[ENTER] + "Secondary Station/Primary Station" + [ENTER]
CM 11CV+/11CVS+:
External Output
Sets the External Output:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "EXTERNAL
OUTPUT" + [ENTER]
Then choose your preferred setting among External Alarm (when activated, this
pin goes to GND level. It is used to command an external buzzer), Radar Power
On (it is command switch for the Radar. It must be used in conjunction with the
Radar Junction box device) and Off.
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Interphase CHART MASTER 11 CV plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info