Bedienungsanleitung Intex 26797 Prism Frame (Seite 11 von 20) (Englisch)

686121

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

119

SAVE THESE INSTRUCTIONS

(119PO) ULTRA XTR™ RECTANGULAR / PRISM FRAME™ POOLS ENGLISH 7.5” X 10.3” PANTONE 295U 11/07/2018

English

Page 11

POOL SETUP (continued)

YoumayhavepurchasedthispoolwiththeIntexKrystalClear™filterpump.Thepumphasits

own separate set of installation instructions. First assemble your pool unit and then set up the

filter pump.

Estimatedassemblytime60~90minutes.(Notetheassemblytimeisonlyapproximateand

individualassemblyexperiencemayvary.)

• Findaflat,levellocationthatisfreeandclearofstones,branchesorothersharpobjectsthatmay

puncture the pool liner or cause injury.

• Openthecartoncontainingtheliner,joints,legs,etc.,verycarefullyasthiscartoncanbeusedtostore

the pool during the winter months or when not in use.

• Removethegroundcloth

(14)

fromcarton.Spreadit

 outcompletelywithitsedgesbeingatleast5-6’

 (1.5-2.0m)fromanyobstaclesuchaswalls,fences,

 trees,etc.Removetheliner

(15) from carton and

 spreaditoutoverthegroundclothwiththedrainvalve

 towardsthedrainingarea.Placethedrainvalveaway

from the house. Open it up to warm it in the sun. This

warming will make installation easier. Make sure the

liner is centered atop the ground cloth. Be sure to face

the end with the 2 hose connectors towards the

electrical power source.

IMPORTANT: Do not drag the liner across the

ground as this can cause liner damage and pool

leakage (see drawing 1).

• Duringtheset-upofthispoolliner,pointthehose

connections or openings in the direction of the electric

power source. The outer edge of the assembled pool

is to be within reach of the electrical connection for

the optional filter pump.

Removeallthepartsfromthecarton(s)andplace

them on the ground in the location where they are to

be assembled. Check the parts listing and be sure

all the pieces to be assembled are accounted for

(see drawings 2.1-2.4).

IMPORTANT: Do not start assembly if any pieces

are missing. For replacement pieces call the

Consumer Service telephone number in your area.

Afterallpiecesareaccountedformovethepieces

away from the liner for of installation.

NOTE: Sprinkle some talcum powder over the

horizontal beams before sliding them into the pool

liner sleeve. This will make removal of the beams

from the liner easier during the disassembly of the

pool.

ELECTRICAL SOURCE

5 - 6' (1.5 - 2.0 m)

5 - 6'

(1.5 - 2.0 m)

5 - 6'

(1.5 - 2.0 m)

LINER

2.1

157-1/2”x78-3/4”x39-3/8” /15’ X 9’ /16’ X 8’/ 18’ X 9’

(A)

CORNER JOINT

(F)

(D)

(F)

(D)

(C)

(A)

(C)

LINER

(B)

2.2

118-1/8”x68-3/4”

(A)

CORNER JOINT

(F)

(D)

(F)

(D)

(C)

LINER

(E)

(B)

2.3

(A)

CORNER

JOINT

CORNER

JOINT

CORNER

JOINT

CORNER

JOINT

(F)

(D)

(E)

(D)

(F)

(E)

(C)

LINER

(B)

(C)

(A)

(B)

24’ X 12’

(E)

(A)(B)(C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex 26797 Prism Frame Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex 26797 Prism Frame

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info