Bedienungsanleitung Bestway 60057 Lay-Z-Spa (Seite 21 von 328) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

752527

Zoom out

Zoom in

Vorherige Seite

1/328

Nächste Seite

Ambient Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Water Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Set Temperature

40ºC(104ºF)

Heating Duration

18.5h - 21.5h

15h - 18h

11.5h - 14.5h

8.5h - 11h

5.5h - 7.5h

IMPORTANT

To reach 40°C (104°F), the heating duration required is based on the starting water

temperature and ambient temperature, the data below is purely for reference. To

display the current water temperature, run the filter system for at least a minute.

Power Rate Massage Tube PowerHeat Element Power Jet Pump Power

2,000W at 20ºC

Filter Pump Power

50W 1200W

220-240V AC,

50Hz, Single Phase

2,050W at 20ºC 800W

HEATING RESET

When using the Lay-Z-Spa for first time, or after a long period of

inactivity, be sure to press the reset button on the pump using a

small and thin object.

If the temperature on the control panel (or the water temperature)

has not changed 4-5 hours after activation of the heating system,

use a thin object to press the RESET BUTTON, and restart the

heating system.

IMPORTANT: The heating system will not operate if the outside

temperature is above 40ºC (104 ºF) or if the Lay-Z-Spa is under direct sunlight.

Under these conditions, please wait until a cooler time of day before pressing the

RESET BUTTON with a thin object and restarting the heating system.

RESET

•

You can keep the spa on during winter when the temperature is lower than 6°C

(42.8°F)

The Freeze Shield™ system automatically keeps the water temperature between

6°C

(42.8°F)

and 10°C

(50°F)

, and it will prevent the water from freezing.

Important:

If the water temperature is below 6°C

(42.8°F)

, the spa heater must always

be on. In this mode, the Freeze Shield™ system can keep the internal temperature

between 6°C

(42.8°F)

and 10°C

(50°F)

to prevent damage, such as water freezing in the

pipes or the circulation system.

Important:

If the Freeze Shield™ system isn’t working, alarms will pop up on the spa.

Be sure to check the status of your spa if the outdoor temperature is below 6°C

(42.8°F)

In case of a long-term absence from home when there is a risk of temperatures falling

below 6°C

(42.8°F)

, we strongly suggest disassembling the spa and storing it following

the storage procedure.

•

Any damage as a result of using the spa in these conditions is the responsibility of the

customer. Do not use the spa when the ambient temperature reaches -10°C(14°F).

• Be sure to cover the spa with the

spa cover whenever the heating

function is activated. Leaving the

spa uncovered will increase the

heating duration required.

• When the spa is assembled with

water, do not switch off the spa

heater if the temperature is lower

than 6ºC(42.8°F).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 60057 Lay-Z-Spa Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info