Bedienungsanleitung Intex Easy Set - 128146 (Seite 5 von 19) (Englisch)

685986

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

86PO

S AVE THESE INSTRUCTIONS

(86PO) EASY SET POOL ENGLISH 7.5” X 10.3” PANTONE 295U 05/17/2016

English

Page 5

Barriers for Residential Swimming Pool Guidelines:

An outdoor swimming pool, including an inground, aboveground, or onground pool, hot tub, or spa, should be

provided with a barrier which complies with the following:

The top of the barrier should be at least 48 inches above grade measured on the side of the barrier which

faces away from the swimming pool. The maximum vertical clearance between grade and the bottom of

the barrier should be 4 inches measured on the side of the barrier which faces away from the swimming

pool. Where the top of the pool structure is above grade, such as an aboveground pool, the barrier may

be at ground level, such as the pool structure, or mounted on top of the pool structure. Where the barrier is

mounted on top of the pool structure, the maximum vertical clearance between the top of the pool structure

and the bottom of the barrier should be 4 inches.

Openings in the barrier should not allow passage of a 4-inch diameter sphere.

Solid barriers, which do not have openings, such as a masonry or stone wall, should not contain

indentations or protrusions except for normal construction tolerances and tooled masonry joints.

Where the barrier is composed of horizontal and vertical members and the distance between the tops of the

horizontal members is less than 45 inches, the horizontal members should be located on the swimming pool

 sideofthefence.Spacingbetweenverticalmembersshouldnotexceed1-3/4inchesinwidth.Wherethere

 aredecorativecutouts,spacingwithinthecutoutsshouldnotexceed1-3/4inchesinwidth.

Where the barrier is composed of horizontal and vertical members and the distance between the tops of

the horizontal members is 45 inches or more, spacing between vertical members should not exceed 4

 inches.Wheretherearedecorativecutouts,spacingwithinthecutoutsshouldnotexceed1-3/4inchesin

width.

Maximummeshsizeforchainlinkfencesshouldnotexceed

1-1/4

inch square unless the fence is provided

 withslatsfastenedatthetoporthebottomwhichreducetheopeningstonomorethan1-3/4inches.

Where the barrier is composed of diagonal members, such as a lattice fence, the maximum opening formed

 bythediagonalmembersshouldbenomorethan1-3/4inches.

Access gates to the pool should comply with Section I, Paragraphs 1 through 7, and should be equipped

to accommodate a locking device. Pedestrian access gates should open outward, away from the pool, and

 shouldbeself-closingandhaveaselflatchingdevice.Gatesotherthanpedestrianaccessgatesshould

have a self-latching device. Where the release mechanism of the self-latching device is located less than 54

 inchesfromthebottomofthegate,(a)thereleasemechanismshouldbelocatedonthepoolsideofthe

 gateatleast3inchesbelowthetopofthegateand(b)thegateandbarriershouldhavenoopeninggreater

than 1/2 inch within 18 inches of the release mechanism.

Where a wall of a dwelling serves as part of the barrier, one of the following should apply:

(a)

All doors with direct access to the pool through that wall should be equipped with an alarm which

produces an audible warning when the door and its screen, if present, are opened. The alarm should

  soundcontinuouslyforaminimumof30secondswithin7secondsafterthedoorisopened.Alarms

  shouldmeettherequirementsofUL2017General-PurposeSignalingDevicesandSystems,

Section 77. The alarm should have a minimum sound pressure rating of 85 dBA at 10 feet and the

sound of the alarm should be distinctive from other household sounds, such as smoke alarms,

telephones, and door bells. The alarm should automatically reset under all conditions. The alarm should

be equipped with manual means, such as touchpads or switches, to temporarily deactivate the alarm for

a single opening of the door from either direction. Such deactivation should last for no more than 15

seconds. The deactivation touchpads or switches should be located at least 54 inches above the

threshold of the door.

(b)

ThepoolshouldbeequippedwithapowersafetycoverwhichcomplieswithASTMF1346-91listed 

below.

(c)

Other means of protection, such as self-closing doors with self-latching devices, are acceptable so long

  asthedegreeofprotectionaffordedisnotlessthantheprotectionaffordedby(a)or(b)described 

above.

10.

Where an aboveground pool structure is used as a barrier or where the barrier is mounted on top of the

 poolstructure,andthemeansofaccessisaladderorsteps,then(a)theladdertothepoolorsteps

 shouldbecapableofbeingsecured,lockedorremovedtopreventaccess,or(b)theladderorsteps

should be surrounded by a barrier. When the ladder or steps are secured, locked, or removed, any

opening created should not allow the passage of a 4-inch diameter sphere.

Barriers should be located so as to prohibit permanent structures, equipment or similar objects from being

used to climb the barriers.

Intex Easy Set - 128146 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex Easy Set - 128146

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info