Bedienungsanleitung Intex PureSpa SJB-HS-20-1G (Seite 5 von 29) (Englisch)

686580

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

299

NLA

S AVE THESE INSTRUCTIONS

(299NL) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 05/10/2017

English

Page 5

CAUTION

• Maintain water chemistry in accordance with manufacturer’s instructions.

1. Press the RESET button on the RCD.

2. Turn on the spa electrical equipment.

3. Press the TEST button on the RCD. The RCD indicator should

turn off and the electrical equipment should shut off. If the RCD

indicator does not turn off, and the electrical equipment does not

shut off, the RCD is faulty. Do not use the spa. Contact a qualiﬁ ed

electrician to correct the fault.

4. Press the RESET button on the RCD. The indicator on the RCD

should turn on. If the RCD indicator does not turn on, the RCD is

faulty. Do not use the spa. Contact a qualiﬁ ed electrician

immediately to correct the fault.

WARNING

TEST

RESET

TEST

RESET

TEST

• Always keep plug dry, plug in with wet plug is deﬁ nitely forbidden!

• The plug of SPA must be directly connected only to a earthed socket-outlet from a ﬁ xed electrical

installation.

• To reduce the risk of electric shock

and ﬁ re

, do not use extension cords, timers, plug adaptors or

converter plugs to connect unit to electrical supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Do not leave the spa empty for extended period of time. Do not expose the spa to direct sunlight for

extended period of time.

• When the appliance is not in use for long period of time, such as in the winter, the spa set should be

disassembled and stored indoor.

• Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.

• Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex

service center for further direction.

• Never use the spa alone or allow others to use the spa alone.

• Never pour water with a temperature higher than 40°C (104°F) into the spa directly.

• Keep all pets away from spa to avoid any damage.

• Do not add bath oil or bath salt to the spa water.

• The spa must be setup on a level, ﬂ at and smooth surface that is capable of supporting the maximum

load of the ﬁ lled spa with four adult occupants: weight 2500 lbs (1136 kg); six adults: 3500 lbs (1592 kg).

• Provide adequate drainage system around the spa to deal with overﬂ ow water and splashes.

WARNING

• This product is provided with a RCD located at the end of the power cord. The RCD must be tested

before each use. Do not use the spa if the RCD does not function properly.

Disconnect the power cord until the fault has been identiﬁ ed and corrected. Contact a qualiﬁ ed

electrician to correct the fault. Do not bypass the RCD. There are no serviceable parts inside the

RCD. Opening the RCD will void the warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex PureSpa SJB-HS-20-1G Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex PureSpa SJB-HS-20-1G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info