Bedienungsanleitung Intex PureSpa SJB-HS-20 (Seite 13 von 27) (Englisch)

686585

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

264

S AVE THESE INSTRUCTIONS

(264IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/07/2015

English

Page 13

OPERATION

On/Off Button: Once the unit is plugged in, use this button to active the control unit panel buttons. The

light next to the button is green when activated. Press this button to turn off all currently activated functions.

NOTE: The On/Off button may appear as a black button in the center of the control panel.

Heat Button: Use this button to activate the heating system. The pump will heat the spa water until the

water temperature reaches the set temperature. When the spa water temperature drops 1-2°C (1.8-3.6°F)

below the set temperature the heating system will restart. When the ﬂ ame icon on the display is red, the

heating system is activated. When the ﬂ ame icon turns green, the water is at the set temperature. The

heating system is at rest and the ﬁ ltration system will continue working nonstop.

NOTE: To stop the ﬁ ltration system while the heater is at rest mode, press the ﬂ ame button ﬁ rst and then

the ﬁ lter button. Pressing the ﬂ ame button only while the heater is at rest mode will turn off the heating

system only and the ﬁ ltration system will operate for another 24 hours before it turns off automatically.

Celsius/Fahrenheit Toggle button:

The temperature can be displayed in either Fahrenheit or Celsius. The system’s default is Celsius.

CAUTION: NEVER use the spa if indicated water temperature is more than 40°C (104ºF).

Temperature Adjustment Buttons: Pressing the Temperature Increase or Decrease buttons will

cause the LED to ﬂ ash. When ﬂ ashing you can adjust to the desired temperature setting. If you hold these

buttons down the values will rapidly increase or decrease. The new and desired temperature setting will

remain on the LED display for 5 seconds to conﬁ rm the new value.

NOTE: The default temperature is 20°C (68°F).

NOTE: Temperature adjustment ranges from 20°C (68°F) to 40°C (104°F).

Water Filter Button:

This button turns the ﬁ lter pump on and off.

If the heating system is activated the ﬁ ltration system will

automatically start.

The water ﬁ lter icon on the display is green when activated.

Water Jet Button: Use this button to activate the jet massage system. After 30 minutes of continues

use, the jet massage system will automatically turn off. The water jet icon on the displays is green when

activated. The angle of the water jet nozzles inside the spa tub wall can be adjusted manually.

WARNING: Do not run jet system when the cover is attached, air pressure may accumulate inside the spa

and cause irreparable damage and bodily harm.

Bubble Button: Use this button to activate the massage system, which has a 30-minute auto-shutoff

feature. The bubble icon on the displays is green when activated.

WARNING: Do not run Bubble system when the cover is attached, air can accumulate inside the spa and

cause irreparable damage and bodily harm.

Sanitizer Button: Use this button to activate and set operating hours for the sanitation system.

LED Display: Once plugged in the LED displays the current water temperature automatically.

NOTE: The built-in hard water treatment function works automatically in conjunction with the ﬁ ltration system.

Jet Nozzle Adjustment

The amount of water and pressure coming out from the jet nozzles can be adjusted by turning the jet

nozzle rim clockwise (maximum water output), counterclockwise (low water output) or anything in between.

Closing one or 2 jet nozzles will divert more water pressure to the other jet nozzles.

A: Heat Button

B: Celsius/Fahrenheit Toggle Button

C: Temperature Increase Button

D: Temperature Decrease Button

E: Water Filter Button

F: Water Jet Button

G: Sanitizer button

H: LED Display

I: On/Off Button

J: Bubble Button

SPA CONTROL UNIT PANEL

 )

40 C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex PureSpa SJB-HS-20 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex PureSpa SJB-HS-20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info