Bedienungsanleitung Intex SB-H10 PureSpa (Seite 15 von 24) (Englisch)

784587

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

347

S AVE THESE INSTRUCTIONS

(347PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 05/21/2020

English

Page 15

MAINTENANCE AND CHEMICALS



The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if

necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water.

The maintenance of a proper water balance through appropriate use of sanitizers is the single most important

factor in maximizing the life and appearance of the spa tub as well as ensuring clean, healthy and safe water.

Proper technique is important for water testing and treating the spa water. See your pool/spa professional for

chemical, sanitizer, test kits and testing procedures questions.

 ALWAYS FOLLOW THE CHEMICAL MANUFACTURER’S DIRECTIONS, AND THE HEALTH AND

HAZARD WARNINGS.

 Concentrated chlorine

solutions can damage the spa tub. In no event is Intex Recreation Corp., Intex Development Co. Ltd., their

related companies, authorized agents and service centers, retailers or employees liable to the buyer or any other

party for costs associated with the loss of spa water, chemicals or water damage.



Protect all the spa occupants from possible water-related illnesses by keeping the spa water clean and sanitized.

Always practice good hygiene. To ensure proper spa water quality follow these procedures:

 Inspect and clean the lter cartridge once a week, and change the lter

cartridge as needed.

  Unscrew the cartridge housing assembly from the spa tub wall and

remove the cartridge .

 Use a garden hose to rinse o󰀨 the cartridge. If the cartridge remains

soiled and discolored it should be replaced. Keep spare cartridges

on hand.

 Reinstall the clean cartridge back into the cartridge housing and

replace the cartridge housing assembly back onto the spa tub wall.

 Change the spa water every 2~3 months, or it becomes cloudy and proper

water chemistry does not clear it up. See “Spa Tub Drainage” and “Spa

Tub Cleaning” sections for details.

 Use spa chemicals to maintain proper water chemistry. Spa damage

resulting from misuse of chemicals and mismanagement of spa water

is not covered by the warranty.

 All occupants must shower before entering the spa.



Maintain the spa water pH level between 7.2 and 7.8, total alkalinity level between 80 and 120 ppm and free

chlorine level between 2 to 4 ppm. Use the included test strips to test the spa water chemistry before each use

of the spa and continue to test the water no less than once a week.

The Test Strips can test the “Free Chlorine”, “pH”, “Total Alkalinity” and “Calcium Hardness” levels at the same

time:

 Dip the entire strip into the water and remove immediately.

 Hold the strip level for 15 seconds. Do not shake excess water from the strip.

 Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level

in the pool water.

 Check the expiry date of the test kit as the test results may be inaccurate if the kit is used after that date.

Low pH will damage the spa tub and pump. Damage resulting from chemical imbalance is not covered by the

warranty.

Use the included chemical oater dispenser to administer chlorine [chemical tablet size: less than 1” (2.5 cm)

diameter] into the spa water. Add 1 tablet into the dispenser. Always follow the chemical manufacturer’s

directions. Remove the chemical oater dispenser when the spa is in use.

Never let chlorine come in contact with the spa tub if it is not completely dissolved.

Flush all pipes with treated water by activating the bubble function for an hour a day.

Press the

button on the spa control panel to turn on the bubble air blower and help dissolve

the chemicals into the water. Never mix chemicals together. Add the chemicals to the spa water separately.

Thoroughly dissolve each chemical before adding another one to the water.



Always unplug this product from the electrical outlet before removing, cleaning, servicing or

making any adjustment to the product.









Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex SB-H10 PureSpa Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info