Bedienungsanleitung Intex SSP-H-10 PureSpa (Seite 23 von 27) (Englisch)

784581

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

346

S AVE THESE INSTRUCTIONS

(346PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/10/2019

English

Page 23

MAINTENANCE (continued)

In regions subject to freezing temperatures, drain, clean, disassemble and properly store the spa set and related

components indoors when the temperature drops below 4°C (39°F).

1. Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.

2. Reverse set up instructions to deﬂ ate and disassemble the spa tub, spa control unit and spa cover air

bladder.

3. To deﬂ ate the tub and the cover air bladder:

a) Open the deﬂ ation outlet cap (27) with the included bolt

wrench

(6) (see drawing 19).

b) Insert deﬂ ation hose adaptor (28) into the deﬂ ation outlet.

c) Insert inﬂ ation hose (7) over the deﬂ ation hose adaptor (28).

d) Insert the other end of the inﬂ ation hose into the tub air valve

or cover air bladder valve.

e) Press the air bubble button to deﬂ ate.

f) When deﬂ ation is completed reverse above steps and

ensures the deﬂ ation outlet cap (27) is securely fastened.

Caution: Only use for the purpose described in this manual.

Keep the inﬂ ation hose away from water or small objects when the

deﬂ ation function is activated to avoid damage to the blower motor.

4. Make sure all the spa components and accessories are thoroughly

clean and dry before storage. Air-dry the spa tub in the sun for an

hour before folding.

5. Fold the spa tub loosely and avoid any sharp corners to prevent

damage or leakage to the spa tub liner.

6. Prepare additional new cartridges for next time use.

7. Store the spa tub and accessories in a dry, temperature controlled, between 0º – 40ºC (32º – 104ºF),

storage location.

8. The original packing can be used for storage.

STORAGE

Spa Cover

The attachment buckles of the cover are locking buckles. Two keys are provided in the plastic bag with the

manual and other accessories. Each buckle is marked with “locked” and “unlocked” symbols for easy operation:

put the key into the slot on the buckle and turn it to the appropriate position to lock or unlock the buckle

respectively.

To assure safety from unauthorized access, always put the cover on when spa is not in use and lock all

buckles. Always keep the keys out of reach of children. In case you misplace the keys, you can use any similar

size ﬂ at screwdriver to lock or unlock the buckles.

Inspect the spa cover regularly for leaks, premature wear and tear, damage, or signs of deterioration. Never

use a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised access

to the spa by a child.

Spa Tub and Cover Air Bladder Repair

Use the enclosed repair patch to repair any puncture:

• Clean and dry the area to be repaired thoroughly.

• Remove the patch backing paper and press patch ﬁ rmly over the puncture. Smooth out the surface to

remove any air bubbles under the patch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex SSP-H-10 PureSpa Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info