Cetus Instruction Booklet
1654724~A 7
FUNCTION OF PARTS：
Main Key Switch (A)
1. Turn the key to the right - turn the scooter on.
2. Turn the key to the left - turn the scooter off.
TOP CONTROL PANEL
Hazard Light (B): Switch on by pressing once, switch off by
pressing again. Press hazard light button once. The right / left
lights and parking indicator start to flash, warning tone acts as
well. If the hazard lights are activated, with the key switched to
the On position, the lights will continue to flash even when the
key is switched off. The hazard light button should be depressed
to cancel the flashing.
Mode (C): Change mode by pressing once
A. Clock
B. Temperature
C. Speedometer
D. ODO
E. Trip Meter
Horn (D): Press horn button once to sound warning tone when necessary.
Left Turn Signal (E): Press Left Turn Signal button once. The front and rear left turn indicators start to
flash, and warning tone sounds simultaneously. Press button again to switch off the turn indicators / signal
and tone.
Right Turn Signal (G): Press Right Turn Signal button once. The front and rear right turn indicators start
to flash, and warning tone sounds simultaneously. Press button again to switch off
the turn indicators / signal and tone.
※ Right-hand / Left hand direction indicator switches itself off automatically after 30 seconds.
Headlight (F): Press Headlight button once to switch on, switch off by pressing again.
Acceleration (H): Press Acceleration button once to increase speed, fine tune in 1'5 speeds.
Deceleration (J): Press Deceleration button once to decrease speed, fine tune in 1'5 speeds.
Hi / Lo Switch (I): Press Hi / Lo Speed button once. The High / Low Speed Indicator will light on, means
driving in high speed mode. Press again, the indicator will extinguish means driving in
low speed mode.
(Hi / Lo speed will vary depending on your current speed settings.)
Tiller Storage Compartment (K): Provides you a spacious room to put things.
Hand Brake (L): Hold brake when immediate stop is required.
