Bedienungsanleitung Inventor V6MKI32-WiFi (Seite 35 von 140) (Deutsch, Englisch)

771741

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

◄ Page 35 ►

18. Labelling

Equipment shall be labelled stating that it has been de-commissioned and emptied of refrigerant. The

label shall be dated and signed. Ensure that there are labels on the equipment stating the equipment

contains flammable refrigerant.

19. Recovery

• When removing refrigerant from a system, either for service or decommissioning, it is recommend-

ed good practice that all refrigerants are removed safely.

• When tranferring refrigerant into cylinders, ensure that only appropriate refrigerant recovery

cylinders are employed. Ensure that the correct numbers of cylinders for holding the total system

charge are available. All cylinders to be used are designated for the recovered refrigerant and

labelled for that refrigerant(i.e special cylinders for the recovery of refrigerant). Cylinders shall be

complete with pressure relief valve and associated shut-off valves in good working order.

• Empty recovery cylinders are evacuated and, if possible, cooled before recovery occurs.

• The recovery equipment shall be in good working order with a set of instructions concerning the

equipment that is at hand and shall be suitable for the recovery of flammable refrigerants. In addi-

tion, a set of calibrated weighing scales shall be available

• and in good working order.

• Hoses shall be complete with leak-free disconnect couplings and in good condition. Before using

the recovery machine, check that it is in satisfactory working order, has been properly maintained

and that any associated electrical components are sealed to prevent ignition in the event of a refrig-

erant release. Consult manufacturer if in doubt.

• The recovered refrigerant shall be returned to the refrigerant supplier in the correct recovery cylin-

der, and the relevant Waste Transfer Note arranged. Do not mix refrigerants in recovery units and

especially not in cylinders.

• If compressors or compressor oils are to be removed, ensure that they have been evacuated to an

acceptable level to make certain that flammable refrigerant does not remain within the lubricant.

The evacuation process shall be carried out prior to retruning the compressor to the suppliers. Only

electric heating to the compressor body shall be employed to accelerate this process. When oil is

drained from a system, it shall be carried out safely.

20. Transportation, marking and storage for units

1. Transport of equipment containing flammable refrigerants Compliance with the transport regula-

tions

2. Marking of equipment using signs Compliance with local regulations

3. Disposal of equipment using flammable refrigerants Compliance with national regulations

4. Storage of equipment/appliances

The storage of equipment should be in accordance with the manufacturer’s instructions.

5. Storage of packed (unsold) equipment

Storage package protection should be constructed such that mechanical damage to the equipment

inside the package will not cause a leak of the refrigerant charge.

The maximum number of pieces of equipment permitted to be stored together will be determined by

local regulations.

The design and specications are subject to change without prior notice for product

improvement. Consult with the sales agency or manufacturer for details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventor V6MKI32-WiFi Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Inventor V6MKI32-WiFi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info