771741
7
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Page 7
Features
Energy Saving Tips
Default Setting
When the air conditioner restarts after a pow-
er failure, it will default to the factory settings
(AUTO mode, AUTO fan, 24°C (76°F)). This may
cause inconsistencies on the remote control
and unit panel. Use your remote control to
update the status.
Auto-Restart
In case of power failure, the system will immedi-
ately stop. When power returns, the Operation
light on the indoor unit will ash. To restart the
unit, press the ON/OFF button on the remote
control. If the system has an auto restart func-
tion, the unit will restart using the same settings.
Louver Angle Memory Function (Optional)
Some models are designed with a louver angle
memory function. When the unit restarts after a
power failure, the angle of the horizontal louvers
will automatically return to the previous position.
The angle of the horizontal louver should not be
set too small as condensation may form and drip
into the machine. To reset the louver, press the
manual button, which will reset the horizontal
louver settings.
Refrigerant Leak Detection System
In the event of a refrigerant leak, the LCD screen will
display “EC” and the LED indicator light will ash.
DO NOT set the unit to excessive temperature levels.
While cooling, close the curtains to avoid direct sunlight.
Doors and windows should be kept closed to keep cool or warm air in the room.
DO NOT place objects near the air inlet and outlet of the unit. This will reduce the eciency of the unit.
Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.
If you don’t plan to use the unit for a long time, remove the batteries from the remote control.
Clean the air lter every two weeks. A dirty lter can reduce cooling or heating eciency.
Adjust louvers properly and avoid direct airow.
Closing curtains during heating also
helps keep the heat in
Doors and windows should be kept
dosed
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Inventor V6MKI32-WiFi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Inventor V6MKI32-WiFi

Inventor V6MKI32-WiFi Installationsanweisung - Deutsch, Englisch - 140 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info