Bedienungsanleitung Inventum BM125 (Seite 25 von 60) (Deutsch, Englisch, Holländisch, Französisch)

694944

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Question: I can not get the bread out of the breadpan, what can I do?

Answer: This can be caused by two problems. The non-stickcoating of your breadpan is worn out or the bread has not yet

cooled down. If the non-stickcoating is worn out, we advise you to buy a new breadpan. To ﬁnd out what the exact

problem is, we advise the following: as soon as the breadmaker has ﬁnished, take out the breadpan with the bread and

let it cool down for 15 to 20 minutes. Turn the breadpan upside down and slowly shake out the bread. Leave the bread

to cool for another 15 minutes on a wire rack before you cut it.

Question: There is a margin on the kneadingblade. What causes this and how can I prevent this?

Answer: The non-stickcoating at the inside on the kneading blade is thick, soft and not completely hardened. The ﬁnal

hardening happens at ﬁrst operation of the machine. Because of the pressure, which is being put on the kneadingblade

during kneading, the non-stickcoating will become thinner and harder, which causes more space to become between

the kneadingblade and the driveshaft in thebreadpan. This process will happen in the ﬁrst few weeks of operation. This

is fully normal.

Question: The kneadingblade remains in the bread after removing the bread out of the breadpan.Is this normal?

Answer: It is perfectly normal that the kneadingblade sticks in the bread. If this would not be the case, there would be a large

hole in the bread after removing it out of the breadpan. Now the bread will ﬁrst cool down and therefore become more

solid, before the kneadingblade is removed. The hole in the bread will in this case be much smaller. During the ﬁrst few

operations, it could happen that the kneadingblade remains in the breadpan, this is because of the question above.

Question: How can I clean the inside of the breadmaker when the dough has run over?

Answer: You can clean the inside of the breadmaker with a ovencleaner. Make sure that you protect the heating element. You

can clean the heating element by letting the breadmaker, without content, ﬁnish a complete program, once or twice.

The heating element will burn clean.

Question: Because of a diet I am not allowed to eat bread with sugar. Is it possible to make a sugarfree bread in this machine?

Answer: Yes, this is possible. You can leave out the sugar from the basic-recipe. When doing this, you should leave out the salt

from the recipe also.

Question: My bread collapses, when changing from rising to baking. What is the problem?

Answer: This could be caused by two problems. Either you have used too much yeast or too much water. In most cases the

problem is caused by too much water. The recipes in the instruction manual are basic-recipes. It could happen for

example that the ﬂour needs less water then stated. We advise you to use 10 to 20 ml. less water. The problem should

now be solved.

Question: When I bake a bread with raisins, all the raisins are at the bottom. What can I do to solve this?

Answer: The dough is probably to compact and cannot divide the raisins properly. Add 10 to 20 ml of water to the basic-recipe,

causing the dough to be more ﬂexible and the raisins to divide better amongst the dough. Please make sure that the

raisins themselves are not too wet.

Question: The crust is sometimes light and sometimes dark?

Answer: You can set this yourself with the button “crust” (= kleur). For a light crust set the breadmaker on light (L), for a dark

crust set the breadmaker on dark (D).

Question: What has happened when the bread is so high that is touches the lid?

Answer: You have used too much yeast and/or sugar, which causes more gas inside the bread and too much rising.

Question: Why is not allowed to make bread with fruit with the program “fast-superfast”?

Answer: The time for rising is less with this program and when you use more ingredients, it inﬂuences the bakingtime which

causes a bad result if you use such a program with these ingredients, like fruit.

Question: The breadmaker is kneading slower when making a heavy bread?

Answer: This is normal when you use these recipes. It does not cause a problem for the machine, but it is advisable to add one

tablespoon of ﬂuids.

Before you take the bread away for repairs

You keep getting bad results

We advise to make one bread with a ready-made breadmix. You only have to add water and butter. When you get a good result, it

means that your breadmaker has no problem and you should check the freshness of the ingredients. If you get a bad result you

can consult with your supplier.

Attention: when you use a ready-made mixture, you must take in account the amount of the mixture. Most ready-made mixtures

are for making a loaf of 800 grams.

The breadmaker does not work

- Is it activated?

- The temperature is too high

The bread is collapsed/The center is moist

- The bread was left too long in the breadpan after baking.

- Too much water or too much yeast is used.

Smoke is coming from the airvents

- Maybe ingredients spilled on the heating element.

The top of the bread is cracked and brown

- Too much ﬂour, yeast or sugar.

The bread is too small

- Not enough ﬂour, yeast, sugar or water

- Use of whole wheat or ﬂour with chemical yeast.

English • 25

Inventum BM125 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info