Bedienungsanleitung Inventum BM20 BLOOD PRESSURE MONITOR (Seite 26 von 32) (Deutsch, Englisch, Holländisch, Französisch)

656785

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

– Protect the computer from shocks and be careful not to drop it,

– Protect it against moisture, dirt, wide fluctuations in temperature and the direct rays of the sun,

– Only ever use the cuffs provided with the monitor or original replacement cuffs. Otherwise incorrect

results will be recorded.

– To prevent any hazard as a result of the cuff tube, keep the tube out of children’s reach and never

put it round your neck.

– Do not use it in areas where there are strong electromagnetic fields, i.e. keep it away from

transmitters and mobile phones.

• Do not press buttons without the cuff fitted.

• Use the appliance only on people with an upper arm circumference that is within the range recommended

for this appliance. As a rule, these are adults.

• If the computer is not used for a lengthy period of time, it is advisable to remove the batteries.

• Keep the batteries out of reach of children. Batteries do not belong in domestic waste.

• Dispose of batteries at the appropriate collection points.

• Do not open the computer. Failure to comply invalidates the warranty. You must not adjust or repair the

computer yourself or its correct function will no longer be guaranteed.

• This device is de signed to measure the blood pressure and pulse rate on upper arms of adults.

• This instrument is not intended for commercial or clinical use.

•

Never immerse the blood pressure monitor in water or any other liquid.

• If you have further questions about using our devices, please contact your dealer.

Inserting the batteries

• Remove the battery cover from the back of the monitor.

Insert 4 alkaline-batteries, type AA, 1,5 V. making

absolutely sure that you insert them with the correct

polarity as marked. Never use rechargeable batteries.

• Replace the battery cover carefully. Now you can set the

date and time.

Setting date/ time

The date/ time setting is necessary, so that yu can save your readings correctly with the date and time

and call them up again later.

• First the year starts blinking. Press “M1” to increase numbers, or “M2” to decrease. Set the year accordingly

and confirm with the Start/Stop button.

• Using the “M1” and “M2” buttons, now enter the month. Confirm with the Start/Stop button.

• Now enter the day using the “M1” and “M2” buttons. Confirm with the Start/Stop button.

• Now you can set the time. This is displayed in 24-hour mode. First enter the hours, confirm with the Start/

Stop button and then enter the minutes. Once this is confirmed using the Start/Stop button, the device

automatically returns to normal time mode.

Changing batteries

If the battery change symbol „ “ is blinking, the batteries are already too low. Even though

measurement is still possible, the batteries should be replaced soon. If the battery change symbol „ “

is continuously illuminated, measurement is no longer possible and you must replace all the batteries. Once

batteries have been removed from the device, the time must be reset.

I N S T R U C T I O N S F O R U S E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum BM20 BLOOD PRESSURE MONITOR Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info