Bedienungsanleitung Inventum EM100G (Seite 14 von 20) (Deutsch, Englisch, Holländisch, Französisch)

54590

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The machine only functions with pods marked .

• Fill the water tank with freshly drawn water.

• Connect the machine to the mains by pressing the

switch, position 1, located at the rear of the machine.

• The central green control light will ash.

• Wait until the green control light stays lit.

• Place a

pod in the slit.

• Place a cup under the spout.

• Place the selector in the

coffee position.

• When the cup has lled as much as you want, turn the

selector back to zero

•

to stop the machine.

Attention: if you do not turn the selector back, the

 coffeewillkeeponowing.Youcancontrolthetaste

of your coffee.

• The pod will automatically be ejected into the bin

provided for this purpose.

I CAN’T MAKE COFFEE

Make sure the green control light stays lit. While the

machine is warming up, it is normal that you should not

be able to make coffee; check whether the machine is

not in standby mode.

THE POD IS NOT EJECTED

Check whether the pod bin is empty.

THE COFFEE DOES NOT COME OUT OF THE SPOUT

Check the level of water in the tank.

THE CONTROL LIGHT DOES NOT LIGHT ON

Check whether the machine is correctly connected to

the mains. Check whether the hood is closed.

Before you use the appliance for the rst time, please do

as follows: U

npack the appliance carefully and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any visible damage, that

could be caused by transportation.

Place the appliance on a stable and heat resistant

surface. Wipe the housing of the appliance only with

a damp cloth. The parts such as the water tank, the

pod bin, the drip tray and the grid must be cleaned

with warm water and some washing up liquid. Dry the

parts thoroughly before you place them back into the

espressomachine.

Before plugging into a socket, check that the voltage in

your home corresponds with the voltage printed at the

bottom of the appliance.

Place the supplied BRITA cartridge according to the

instructions on the packaging in the water tank.

The BRITA Maxtra cartridge reduces substances like

chlorine, limescale (carbonate hardness), aluminium,

heavy metals (like lead and copper) and certain pesticides

as well as organic impurities. To achieve optimum lter

performance BRITA recommend that if you have re-lled

the funnel 2–3 times in quick succession you should

allow the cartridge to rest by not relling the funnel

again for 15–30 minutes.

You will enjoy cleaner, clearer, great tasting water

for hot and cold drinks and for preparing food.

BRITA ltered water also protects

your domestic appliances against

lime scale build-up.

The BRITA cartridge supplied

with your machine must be

changed regularly. Check the

BRITA replacement indicator on

top of the lid of the water tank.

2 | BEFORE FIRST USE

5 | PROBLEMS

4 | TO MAKE COFFEE

3 | BRITA CARTRIDGE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum EM100G Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info