Bedienungsanleitung Inventum HK 2 (Seite 22 von 28) (Deutsch, Englisch, Holländisch, Französisch)

111205

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Problem

The coffeepadmachine doesn’t work.

Causes

1. The appliance is not plugged in.

2. The appliance is not placed correctly on the base.

3. The fuse in the fuse box has blown.

Solutions

1. Plug the appliance in.

2. Place the appliance correctly on the base.

3. Check the fuses in the fuse box.

Problem

Too small amount of coffee.

Causes

The reservoir was not lled with enough water.

Solutions

Fill the reservoir slowly with water. Because of the

divided reservoir the water will sink slowly to the

bottom of the reservoir. Therefore wait after the rst

time you have lled the reservoir and always check a

second time that the reservoir is lled with sufcient

water for the number of cups you want to make. Fill,

if necessary, the reservoir with the needed amount of

water.

If your problem is not solved, please contact our technical

department or return the coffeepadmachine to your

supplier.

We advise to clean the coffeepadmachine on a regular

bases. Regular cleaning will prolong the life of your

appliance and will guarantee optimal brewing results.

Please do as follows:

Check

before cleaning if the appliance is unplugged.

Clean the outside of the appliance

with only a damp cloth and dry it

with a dry cloth.

Take the coffeepadmachine from

the base.

Open the lid and take the multi-

padholder and if necessary the

waterlevelindicator (see: picture)

out of the coffeepadmachine.

Take the grid from the driptray and remove the driptray

from the base. Clean the multi-padholder, the grid, the

driptray with warm water and some washing up liquid.

These parts can also be cleaned in the dishwasher.

To prevent the cremamaker on the multi-padholder from

getting clogged, pierce the holes regularly with a needle.

After using pads which contain milk(powder), for

instance cappuccino-pads, you must thoroughly clean

the cremamaker to prevent clogging.

Because of its low voltage of 800 Watts and compact

shape, this coffeepadmachine is extremely suited to take

along on a holiday.

When something unexpected happens while making

coffee (e.g. because the pads are not placed correctly),

take the coffeepadmachine of the base and the device

will immediately shut off.  if you place the

device back on the base it will restart. You can leave the

appliance on the base because the light will automatically

go out. You can also place the device next to the base

until the next use.

When a problem occurs with the coffeepadmachine, read

the following instructions for a solution.





before opening in case of a malfunction.

Problem

Steam comes through the rim of the lid.

Causes

1. The lid is not properly locked.

2. The pads are not placed correctly.

3. The cremamaker is clogged.

Solutions

• Take the appliance from the base and leave it to

cool down. ATTENTION! Pressure is build up in the

appliance. Therefore leave the appliance to cool

down completely before opening in case of a

malfunction. After cooling, open the lid, rell the

water and if necessary replace a pad.

• Check the cremamaker for obstructions. Pierce

the holes in the cremamaker with a needle. For

extended instructions read the chapter CLEANING &

MAINTENANCE.

• Lock the lid properly. Read chapter MAKING COFFEE

for more instructions.

Problem

No crema (foam) on the coffee.

Causes

1. The cremamaker is not placed on the multi-

padholder.

2. The cremamaker is clogged.

Solutions

1. Place the cremamaker on the multi-padholder.

2. Check the cremamaker for obstructions. Pierce

the holes in the cremamaker with a needle. For

extended instructions read the chapter CLEANING &

MAINTENANCE.



6 | PROBLEMS & SOLUTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum HK 2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info