Bedienungsanleitung Inventum HW86 (Seite 11 von 16) (Deutsch, Englisch, Holländisch, Französisch)

54890

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Before you use the appliance for the rst time, please do

as follows: Carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. Place the appliance on a stable and heat

resistant surface.

The minimum amount of water must be 0,2 liters. The

maximum amount of water to be used is 1 liters. Before

use you must ll the waterkettle to the maximum level

and boil this amount. Do this twice. Throw away the

boiled water and rinse the kettle with cold water. The

appliance is now ready to use. The kettle is only suitable

for boiling water. Never ll the kettle with milk, tea,

coffee or others drinks.

Open the lid by pushing the button and ll the kettle with

an amount of water and close the lid. Place the kettle

on the base and make sure that the plug is in the socket.

Switch the kettle on by pressing the on/ off switch down.

The red pilot lamp will light up. The kettle will now boil

the water.

Attention: never switch the kettle on without water.

If, for whatever reason, the kettle is switched on without

water, the dry-boilprotection will automatically switch

the kettle off. Put the switch back up. In this case take

the kettle from the base and let it cool down for several

minutes. After that, rell the kettle and switch it on

again. Make sure that the lid is closed properly, if not the

kettle will go on boiling and will not automatically switch

off.

The kettle will automatically switch off when the water

is boiled and the pilot lamp will switch off. If you want to

boil the water again, you must wait approx. 30 seconds

before you switch it on again, so that the switch can cool

down. The kettle can also be switched off at any time

with the switch. When you take the waterkettle off the

base while boiling, it will switch off. When you place

the waterkettle back on the base, you must again wait

approx. 30 seconds to let the switch cool down before you

can switch it back on.

Attention! It may occur that you see condensation on the

base. This is completely normal and has no consequences

for the use of the waterkettle.

2 | BEFORE FIRST USE

Scale can form on the inside of the waterkettle. We

advise to descale the waterkettle from time to time.

Use a suitable descalingproduct for waterkettles/

coffeemachines and follow the instructions.

You can also descale the waterkettle with lemonjuice.

The acid in this juice will remove the scale. This natural

method avoids the use of chemicals. Fill the waterkettle

half-full with warm water. Add the juice of half a lemon.

Boil the water and leave it to cool for half an hour. Throw

away the boiled water and rinse the waterkettle to

remove any remainders. Fill the waterkettle with fresh

water and boil it again. Throw away the water and rinse

the kettle once more. Never clean the appliance with

detergents. These products can damage your waterkettle.

To remove the anti-scalelter for cleaning, take the

waterkettle of the base and let it cool down. Do not

remove the anti-scalelter when the waterkettle is still

warm and/or lled with water. Pull the anti-scalelter

straight up out of the spout and clean it with warm water.

Make sure while replacing the lter to place it correctly

in the spout. Never place the anti-scalelter loose in the

waterkettle.

Clean the waterkettle on regular bases for continues

performance. Never immerse the waterkettle, the

base or the plug in water or others liquids.

Let the

waterkettle cool off and always unplug the appliance

before cleaning. Wipe the outside of the waterkettle with

a damp cloth and dry the kettle afterwards. Never use

any abrasives!

5 | DESCALING

3 | BOILING WATER

4 | SWITCHING THE KETTLE OFF

6 | CLEANING & MAINTENANCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum HW86 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Inventum HW86

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info