790089
35
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
USING THE DEFROST PROGRAMS
Note:
Only use frozen food stored at -18°C. Make sure that you freeze food in portions and as flat as
possible to fasten the defrosting process.
Remove the packaging and weigh the defrosted food. You need to set the weight for the defrost
programs.
Liquid can be produced during defrosting meat and poultry. Drain the liquid when you turn the food.
Make sure that the liquid does not come into contact with other food.
Place the food on the glass baking tray or in a dish that is suitable for a microwave oven.
After defrosting, leave the food to rest for 10 to 30 minutes to make sure that the complete dish has
the same temperature. Large pieces of meat require more time.
Defrosting by weight
1. Push the function button three times. The display shows '0.1 kg'.
2. Move the slider or push the up/down button to select the weight. The weight should be within 100 - 2000 grams.
3. Push the start button to start the appliance.
When the defrost program finishes, you will hear a sound signal and the appliance goes into standby.
Defrosting by time
1. Push the function button four times. The display shows '1:00'.
2. Move the slider or push the up/down button to set the time.
3. Push the start button to start the appliance.
When the defrost program finishes, you will hear a sound signal and the appliance goes into standby.
Note:
If half the defrosting time passed, a buzzer sounds two times. For a better defrosting result, you should
turn the food over. Close the door and push the start button again to continue the defrosting.
USING THE AUTOMATIC PROGRAMS
When using the automatic programs you only have to select a program and set the weight. The microwave power,
the time and the temperature are preset.
For an overview of the available automatic programs, refer to section
Auto menus
.
1. Push the auto menu button. The display shows the first automatic program number (A-1).
2. Push the auto menu button repeatedly to select an automatic program. The display shows the selected program,
the cooking time and the weight.
3. Move the slider or push the up/down button to select the weight.
4. Push the start button to start the appliance.
When the automatic program finishes, you will hear a sound signal and the appliance goes into the standby state.
Note:
Once you selected an automatic program you cannot change it.
You cannot change the cooking time.
Some automatic programs use preheating. Note: Wait until the appliance is preheated, before placing
the food inside.
Note:
If you open the door of the appliance during cooking, you must touch the start/pause button to continue
the cooking.
PAUSING THE APPLIANCE
1. Push the cancel button to pause the program.
2. Push the start button again to start the appliance again.
English35
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Inventum IMC3834GT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info