You have the best equipment with the MC 60 instrument and the
MCA 60 professional set attachments. This can otherwise be offered
only by a professional chiropodist.
General
• This instrument is intended only for the treatment of hands
(manicure) and feet (pedicure).
• Select an attachment and push it onto the instrument spindle using
a slight pressure. The attachments can be heard to engage. To
remove: pull the attachment and instrument apart in the axial
direction (straight).
• Switch on the instrument by sliding the slide switch to the left
(anticlockwise running) or to the right (clockwise running). The two
buttons marked with plus (+) and minus (-) allow you to select the
speed of rotation. Start every application at low speed and increase
it only as required.
• All file and cutting attachments are coated with a sapphire grain.
This guarantees extremely long life and almost guarantees freedom
from wear.
• Do not exert heavy pressure and always guide the attachments
carefully over the surface to be treated.
• Move the instrument under light pressure in circular movements
slowly over the parts to be treated.
• Note that the cutting attachments will have a reduced effect if the
skin is softened or moist. For this reason, do not carry out any
pretreatment in a bath.
• Do not remove all the callus skin in order to retain the natural
protection of the skin.
• Always ensure that the spindle can rotate freely. It must never be
38
