Bedienungsanleitung Inventum PW705BG (Seite 10 von 28) (Deutsch, Englisch, Holländisch, Französisch)

528423

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

2 | INTERESTING FACTS

The measuring principle of the diagnostic scale

This scale determines the body weight, bodyfat, body

water and the percentage of muscle according to the

principle of Bioelectric Impedance Analysis (BIA). With

this process, an imperceptible, completely safe and

harmless current enables the determination of body

tissue proportions within seconds. This measurement

of electrical resistance (impedance) and the inclusion of

constants and/or individual values (age, height, gender)

can be used to determine the percentage of fat, water and

muscle in the body. Muscle tissue and water have good

electrical conductivity, as the fat cells hardly conduct the

current due to their very high resistance.

Weighing correctly

If possible, always weighs yourself at the same time of

day (ideally in the morning), after going to the toilet,

on an empty stomach and without clothes to achieve

comparable results. Minor deviations are normal. When

you drink 1 glass of water for example a dierence of 300

grams can occur. Place the scale on a ﬁrm, ﬂat surface;

a ﬁrm ﬂoor covering is a basic requirement for correct

weight measurement.

Your scale is an accurate instrument. The human body is

the hardest thing to weigh, because it is always in motion.

Therefore a 99% accuracy of the body weight is the

highest possible. Stand on the scale without moving and

with equal weight distribution on both feet!

Do not underestimate the weight of clothing and when

you have just eaten or drunken anything. Only the long-

term trend counts.

5 | WEIGH ONLY

3 | BEFORE FIRST USE

Before you use the appliance for the ﬁrst time, please do

as follows: carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. Place the scale on a ﬁrm, ﬂat surface.

Remove the batteries from the protective packaging and

insert with the correct polarity. See the diagram inside the

battery compartment.

Press the UNIT button on the back of the scale to select

the correct measuring unit (kg/st/lb).

kg = kilograms

lb = pounds

st = stone

Place the scale on a ﬂat and stable surface and wait for the

scale to turn itself o.

4 | PERSONAL DATA

You must enter personal user parameters in order to

measure your body fat percentage and other physical data.

The scale has 8 memory positions in which you and other

members of your family can save and retrieve personal

settings.

Now you can enter the following setting:

Memory position (P) 1 to 8

Body size 100 to 220 cm

Age 10 to 80 years

Gender

male (

), female ( )

Sportsman or -woman ,

• Press the SET key when the display is

switched o to change the setting. The

ﬁrst memory position P1 ﬂashes on the

display. To select the correct user, press

the or keys and press the SET key

again to conﬁrm.

• After you have entered the correct user, the symbol for

gender will blink. To select the gender (male, female,

sportsman, sportswoman), press the or keys and

press the SET key again to conﬁrm.

• After you have entered the gender, the indication for

body size (height) will blink (preset 170 cm). To set your

own height press the

or keys and press the SET

key again to conﬁrm.

• After you have entered your body size, the indication

for age will blink (preset 40). To set the correct age

(male, female, sportsman, sportswoman), press the

keys and press the SET key again to conﬁrm.

After all parameters have been entered, you can now

measure your weight, body fat and the other data. The

display will show 0,0 kg.

Stand on the scale barefoot and let the scale perform a

measuring. When you step on the scale the next time the

scale will recognize you. When you step o the scale, the

scale will switch o after a few seconds.

TIP: To reset a memory position for another user perform

the same steps as described above. All positions are preset.

The scale has a step-on function. Step barefoot onto the

scale. Stand still with your weight

distributed evenly on both legs. The scale

will start measuring your weight

immediately and a short time later will

display your weight. When you step o the

scale it will turn o after a few seconds.

6 | BODY ANALYSIS

When you stay on the scale after it displayed your weight,

the scale will automatically perform a body analysis. The

scale can identify users according to the weight.

Important: When using the analysis function, make

sure there is no contact between your feet, legs,

calves or thighs. Otherwise the measurement will not

be performed correctly.

After the weight is stable, the “0” signal moves from left to

right for two times, and then shows the data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum PW705BG Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info