Bedienungsanleitung Inventum PW838B (Seite 19 von 24) (Deutsch, Englisch, Holländisch, Französisch)

54507

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Weighing correctly

If possible, always weighs yourself at the

same time of day (ideally in the morning),

after going to the toilet, on an empty

stomach and without clothes to achieve comparable

results. Only the long-term trend counts.

Stand on the scale without moving and with equal weight

distribution on both feet!

Minor deviations are normal. When you drink 1 glass of

water for exemple a difference of 300 grams can occur.

Do not stand on the scale with wet feet and do not

step on the scale when its surface is wet – danger of

slipping! Place the scale on a rm, at surface; a rm

oor covering is a basic requirement for correct weight

measurement.

Before you use the appliance for the rst time, please do

as follows: carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation. If present, pull the battery insulating

strip off the battery compartment cover or remove the

battery's protective lm and insert the battery according

to the polarity.

If provided, pull out the battery insulating strip at the

battery compartment or remove the protective lm from

the battery and insert the battery with

the correct polarity. If the scale fails to operate, remove

the battery completely and reinsert it. Your scale is

provided with a “Change battery”

indicator. If the scale is operating with a battery which is

too weak, “Lo” appears on the display and the scale will

switch off automatically. In this

case, the battery must be exchanged (1 x 3V lithium

battery CR2032). The used, completely drained standard

and rechargeable batteries must be disposed of in

specially marked collection containers, at toxic waste

collection points or electrical product retailers. You are

legally obligated to dispose of the batteries.

Note: Batteries containing pollutants are marked with

the following symbols: Pb = Battery contains lead, Cd

= Battery contains cadmium, Hg = Battery containers

mercury.

• Quickly and rmly tap the standing

surface of your scale with your foot.

The entire display (Ill. 1) appears up

to "0.0" (Ill. 2) as a self-test (tap-

on technology).

• Now the scale is ready to measure

your weight.

• Stand on the scale without moving

about and distribute your weight

evenly on both legs.

• The scale immediately begins to

measure your weight (Ill. 3).

• Your measured weight is displayed

shortly after this (Ill. 4). The scale

switches off a few seconds after you

step down from it.

To calculate your body fat and other values, you must

enter your personal settings. The scale has 10 memory

presets for basic data with which the users, e.g. each

member of the family, can store and call up their

personal settings at any time.

• First you personal settings must be

stored.

• Briey step onto the scale rst and

wait untill the display ”0.0” (Ill. 2)

appears. Then press “SET”. Now the

rst memory preset ashes in the

display (Afb. 5). Select the desired

preset by pressing the buttons “up”

and “down” and conrm

the desired preset with the “SET”

button.

• Now height in cm (inch) ashes in

the display (Afb. 6). Set the desired

value by briey pressing or holding

the buttons “up” or “down”

and conrm it by pressing “SET”.

• “Age” in years then ashes in the

display (Afb. 7). Set the desired

value by briey pressing or holding

the buttons “up” or “down”

and conrm it by pressing “SET”.

• The sex setting “Woman” or “Man”

appears on the display (Afb. 8).

Select your sex by pressing the buttons “up” or

“down” and conrm by pressing “SET”.

• Now the setting for your individual level of activity

or tness appears on the display (Afb. 9). Select the

desired level of activity by pressing the buttons (Afb.

9). Select the desired level of activity by pressing the

buttons “up” or “down” and conrm the desired

level of activity with the “SET” button.

The values you've just set are displayed again

consecutively. After which the scale switches off

automatically.

Note:

To set a memory position for an other user follow

the same steps as written previously and choose the

position you wish to overwrite.

When selecting the level of activity the average and

long-term counts.

• A 1: No physical activity.

• A 2: Little physical activity.

Little and light physical exercises (e.g. walking, light

gardening and gymnastics). This mode should also

be selected before the start of a training or dietary

| SETTING USER DATA

| WEIGHT MEASUREMENT

| BEFORE FIRST USE

| BATTERIES

| ACTIVITY LEVELS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum PW838B Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info